If you need to get a lot of different jobs done, chances are that you’ll need a precision screwdriver set. Allowing you to undertake less regular jobs around the home while also mending cell phones, computers, and more, the right precision screwdriver set could be just what you need. For more regular jobs you may want you use either an electric screwdriver or a ratchet screwdriver. However back to the precision screwdriver, finding the set is not always that easy, but the good news is we can help. We have selected what we believe are 5 of the very best precision screwdriver sets on the market right now, making your hunt for the best set so much easier. Take a look below for more information:
So, What are the products on offer?
At Number One...
JACKLY 45 in 1
The JACKLY 45 in 1 Professional Portable Compact Screwdriver Kit is a unique screwdriver kit that comes with 45 fittings so that you have all of the parts you need to get a wide range of jobs done with ease. Sold for approximately $9.50, the kit is certainly a cheap one, and complete with tweezer tips and an extension shaft, this could be exactly what you need.
45 in 1
Weighing just 1.8 pounds, and measuring 6.1 x 4.3 x 1.2 inches, the JACKLY comes complete with a case allowing you to put the screwdriver parts back where you got them from, so you can find them the next time you need them. With a reputation for being easy to use, this kit could be ideal for those occasional jobs around the home.
At Number Two...
Syntus 63 in 1
The Syntus 63 in 1 Precision Screwdriver Set is an impressive looking set that comes with 57 different bits enabling you to undertake a wide range of jobs. The multi-magnetic driver allows you to add the bits and remove them with ease, and the bits have been made so users can repair a wide range of Apple devices and games console controllers.
63 in 1
Sold for approximately $15, the set also comes with a prying tool that also allows you to slide and separate objects. Measuring 8.5 x 6 x 12 inches, and weighing 13.6 ounces, the Syntus has a reputation for being high quality and very functional.
At Number Three...
ORIA 76 in 1
The ORIA 76 in 1 Screwdriver Set is a very impressive-looking kit that comes with 76 pieces, a flexible shaft, and a portable bag so it can be taken from place to place. Sold for approximately $30, the ORIA is slightly more expensive than the previous kits, but there is a good reason for it. With a SIM care ejector pin, spudgers, a ruler, an LCD suction cup and much more, this screwdriver set could have everything you need.
76 in 1
Ideal for use when repairing cameras, glasses, computers, tablets, and watches the ORIA weighs 1.5 pounds and measures 10 x 4.5 x 2.3 inches and comes with a skid-proof and anti-static driver. Made from CRV steel, and with 60 different screwdriver pieces, this set has a reputation for being strong and sturdy.
At Number Four...
NANCH 23 in 1
The NANCH 23 in 1 Precision Small Screwdriver Set is a modern looking set that comes with 22 tips and an impressive looking screwdriver. Complete with Philips tips along with slotted, torx, security torx, pentalobe, tri-wing and more, this may be the screwdriver set you need to get a lot of jobs done. Sold for approximately $25, the NANCH comes with a metal telescopic driver that has been designed to give you a longer reach, and the anti-slip design enables you to turn it precisely time and time again.
23 in 1
Measuring 5.7 x 4.1 x 1.1 inches, and weighing 9.4 ounces, this set includes tips that have been made from S2 alloy steel, making the tips as strong as they need to be so you get the work done with ease. With a reputation for being a good quality set, it may be exactly what you need.
At Number Five...
The Stanley 66-039 6-Piece Jewelers Precision Screwdriver Set is sold for approximately $8.05, and comes with swivel head handles that help to provide reach and precision. With a storage case that comes as standard, and the ability to resist corrosion, the Stanley 66-039 comes with 2 Philips tips, and 4 slotted tips of varying sizes.
Weighing just 3.2 ounces, and measuring 6 x 3.2 x 0.9 inches, the screwdriver set has plated shafts that ensure the user has a solid and steady grip every time. The plastic storage case is ideal for those who want to keep their screwdrivers tidy, and the steel blades have been tempered and hardened so they last longer. With a reputation for being good quality, this set could be the ideal one for you.
Many different screwdriver sets are made out of different materials, and they all claim to be quite strong. This could make it hard to understand which of these materials is the strongest. Chrome vanadium steel is thought to be the very best material to use when making screwdrivers and their bits, however, products made from chrome vanadium steel are usually quite expensive. With the ability to last for years no matter how many times you use bits made from this material, if you want the very best, you will need to pay for it. Precision screwdriver sets that are made from this material are typically found in workshops and professional garages as those working with them need screwdrivers that are strong, durable, and reliable.
S2 alloy is also thought to be one of the better materials, simply because it’s one of the most durable around. However, if you are thinking of choosing a precision screwdriver set that comes with some reinforced steel, you won’t go wrong. Reinforced steel is pretty tough and durable at the same time, making it ideal for frequent use around the home, or in the garage.
Chrome-plated steel is reasonably ok, and some of the cheaper models come with chrome-plated steel parts. This material does make the parts really good value for money, as it adds a bit of strength and durability.
If you opt for nickel-chrome molybdenum, you will be getting a screwdriver set that is at the bottom of the price and quality range, but that doesn’t mean it won’t last. If you’re looking for a good quality screwdriver set that is ok to use now and again then nickel-chrome molybdenum will do reasonably well.
When it comes to choosing materials, if you can opt for chrome vanadium steel as this is the very best, but if you want something that is ultimately good value for money then it would be wise to choose either chrome-plated steel or S2 alloy. The choice is yours.
The number of pieces you need ultimately depends on the types of jobs you’ll be undertaking. If you’re only going to be working at home on a few jobs around the house, it’s unlikely that you will need anything bigger than a 23-piece set. However, if you are going to be working on much larger jobs, and mending more things (Such as cell phones, computers, watches etc.) the more pieces you have, the better.
If you’re not sure how many pieces you will need, think about the types of jobs you are going to do. Sure, you may want to be able to fix computers and glasses, but if you’re only going to be working on little jobs here and there a 23-piece set is probably more than sufficient.
The price that you’re going to end up paying for your precision screwdriver set will depend on how much you want to spend and how many bits you’ll need. If you want to spend as little as possible, then you may want to opt for a screwdriver set that is less than $10, but please note that it won’t come with a wide range of bits. If you want to spend a lot more on your new set then you will need to be prepared to pay at least $30 for 70+ bits.
If you do find a screwdriver set that has a lot of bits for not very much money, please be aware that the quality may not be very high. Typically the more money you pay, the more bits you will get, and the higher quality they will be. You may get lucky with a middle of the range set, but if you want a lot of bits that are of a high quality it’s always best if you pay a little more.
Questions We Are Frequently Asked…
Should I buy one screwdriver with multiple bits?
Yes, that is if you would like to undertake many different jobs. If you think you’re only ever going to be undertaking a few jobs, it may be worth your while buying 2-3 screwdrivers as they may be all you ever need. If you think you’re going to be doing a lot of different jobs, having one screwdriver with multiple bits could come in quite handy. This is because that one screwdriver can be used for many different projects, for example, if your next job requires you to use a Philips screwdriver, you’ll have one to hand, if another requires you to use a Hex screwdriver of a specific size, you’ll have that to hand as well. This is because the bits/parts can be interchanged, making your life easier, and leaving you a lot more room in your toolbox.
If you think you’re going to be using one particular type of screwdriver quite a lot, you may want to think about buying a screwdriver that is of a specific size. Then, purchase a screwdriver with multiple bits so that you can use those bits, without wearing down the Hex bit for example, that you use all day, every day.
What bits are most important?
While there are many different bits out there, there are four bits that seem to be the most important, these are the flat head, torx, Philips and Hex bits. These seem to be the most important because they tend to be used a lot more than any other bits. If you are in the market for a new screwdriver set, you need to make sure that your new precision screwdriver set comes with these four bits.
Of course, if you tend to use screwdrivers almost every day, chances are you will use other types of bits as well, meaning you should be on the lookout for these when you’re considering buying a new set. Most of the sets have the details you need on their packaging, or on the website where it is sold. Read the information so you can determine whether that particular set is the one you need.
Please note that some of the more expensive screwdriver sets will have a wider range, meaning you’re more likely to get the bits that you want.
If you need a lot of different screwdriver bits to help you get a wide range of jobs done, you’ll need a screwdriver set that has a lot of different sized bits. Above you will find 5 of the best screwdriver sets on the market right now, and we hope you can find the right one for you, so you can get your jobs done soon, and with ease.
Many jobs in and around the home and workshop need to be undertaken with the help of a ratcheting screwdriver. The problem is that there are many different types and brands of ratcheting screwdriver on the market these days, making it hard for any prospective buyer to choose the right one. The good news is that we can help you with your purchase because we have reviewed what we believe to be the best ratcheting screwdrivers on the market right now. Take a look at the list of screwdrivers below, and learn a little more about each product so that you are just that little bit closer to choosing the right ratcheting screwdriver for you.
When it comes to storing all of those different bits, you should ideally opt for a ratcheting screwdriver that is capable of storing the bits for you. This is because the bits are usually quite small and fiddly, and finding them when they’re in among all your other tools can be quiet tricky. Plus, because they are quite small, bits tend to get lost, meaning you may not be able to get your jobs done if you cannot find the bit that you need.
Here is where a ratcheting screwdriver with a mini storage compartment can help: Allowing you to store your bits inside the screwdriver means that you can have access to them whenever you need them, you just need to make sure that when you’re done with the bits you place them in the storage area ready for use next time.
Not every ratcheting screwdriver comes with storage options, but if this is something that appeals to you, you may want to think about purchasing a screwdriver that has storage for its bits. When you’re using your new screwdriver and you want to change a bit, please make sure that you always put the bit that you no longer need back in the storage compartment so you know where to find it next time. This option also means that you’re less likely to lose your bits, keeping them safe and secure so you can find them when you need them, making your DIY life so much easier.
Most ratcheting screwdrivers come with a range of bits that allow users to get a lot of different jobs done using just one tool. The types of bits that the screwdrivers come with often varies, but there are usually some Philips bits and ¼ – 3/8 size bits too. Please be aware that the bits that are compatible with your screwdriver may not be compatible with others. If you lose or damage one of the bits, you may have to look for the same brand bit as it could be the only one that fits in the compartment, and works with your screwdriver.
If there are some specific bits that you need, you should make sure that any ratcheting screwdriver you buy has those specific bits. Surprisingly, types and sizes of bits can and often do vary between different screwdrivers, and different brands, so make sure you know what you need, and buy the screwdriver that comes with the bits you need.
Many ratcheting screwdrivers come with magnetic tips. Tips such as these are ideal as they help to keep those small bits in place when you’re using them. This means that they are a lot less likely to fall off your screwdriver, while you’re getting your job done. What’s more is the magnetic tip can hold the bit in place quite securely when you’re not using your new screwdriver. However, if you want to be extra careful and avoid losing any of your bits, please store them in the small storage compartment that came as standard with your new screwdriver.
Some screwdrivers go so far as keeping your bits safe and secure while you change them around, meaning you can do it with ease, and without worrying that you’ll drop or use the bit. If this sounds like something you would like, please look for a ratcheting screwdriver that comes with a quick-release and secure change option.
Ratcheting screwdrivers are absolutely ideal at helping you to get a lot of jobs done quickly. This is because they have been made for ease of use, and versatility. This type of screwdriver works to get rid of the need to twist the screwdriver and your wrist awkwardly. If you have a lot of work to do, and you find that your wrist often gets tired or starts to ache when using a screwdriver, here is where a ratcheting screwdriver can help. The ratcheting mechanism works to keep the end of the bit in place, while you turn the screwdriver ever so slightly, so that the bit moves the screw that you’re putting in place. As we have already seen, ratcheting screwdrivers also come with a storage compartment allowing you to store your bits inside the screwdriver means that you can have access to them whenever you need them. If you finding you need something for more refined jobs then what you need is a Precision Screwdriver.
A ratcheting screwdriver works via a mechanism that is located in its handle. The mechanism allows the user to move their hand very slightly allowing the screwdriver to make another turn, without having to remove the screwdriver from the screw. Users will also find that they do not need to release any of the pressure that they are putting on the screw, they simply need to turn their wrist ever so slightly, and the job is done.
When using a ratcheting screwdriver, you will hear a few clicks coming from the screwdriver when turning your wrist, this is perfectly normal and the clicks are simply the sound of the ratchet re-engaging.
When using a ratcheting screwdriver, as opposed to a regular screwdriver, you will be able to get your jobs done quickly and more efficiently. This means that if you happen to be putting some screws in wood, you will not need to strain your wrist quite so much, or release any of the pressure that you are putting on the screw.
Ultimately, a ratcheting screwdriver will allow you to get a lot more work done in a very short space of time. What’s more is if you have to use a variety of screws, the bits that come with your new ratcheting screwdriver will mean you don’t have to look for another screwdriver that fits, you can simply add the right-size and shape bit, and carry on with the work you need to do.
As you can see, there are many different ratcheting screwdrivers on the market right now, making it harder for you to find the one that you need. Take a look at the five screwdrivers above, and decide which one you think is the best. Now get ready to get all of those jobs done around your home, in your garage, or in your workshop.
If you are interested in survival techniques and you want to be prepared in case something bad should happen it’s likely that you’ll also be on the lookout for a survival multi-tool. The trouble with this is there are so many different types of survival multi-tools on the market. Here is where we can come in and help out. Below you will find 5 of the best multi-tools on the market right now, making your search for the perfect tool even easier. Whatever your reason for wanting the best survival multi-tool out there, we think you can find it below, so take a look, and get ready to shop for the perfect tool!
When you’re looking to buy a multitool, you may want to consider what you will be using it for. If you are planning to go out into the wild, relying on as little as possible to get by, you may want to opt for a multitool that has a lot of different parts. If you’re looking for a tool to have in your pocket or bag every day, you may not need a multitool that has a lot of different components, you may simply need one that comes with a screwdriver or two, some pliers, and a small blade.
Multitools in general, can be used when going camping, hiking, on vacation, for use in and around the home, fixing bikes, fishing, and for use on survival weekends.
Most multitools come with screwdrivers, a saw, and a few other parts, but some such as the Leatherman Wave come with up to 17 different parts/components. If you think you might need a lot of different parts, you may want to opt for a tool that has a wide range, however, if you think you may only need to use the tool occasionally, you may not have a need for 17 different parts. However, if you tend to use many tools every day, and you think that you could get by with a multitool that has everything you need,.there is likely to be a tool out there that has something for you. Work out what it is you use every day, and find a tool that has a screwdriver or two, for example, in addition to some pliers, a blade, a can opener and an awl.
As you can see from the range of multitools above, prices can vary from less than $15, to $90. The price that you end up paying for your multitool could depend on a few factors:
If you want to pay as little as possible, you may end up with a tool that does not have a lot of different components. It is likely to have the basic components, such as a blade, a screwdriver, and some scissors, but if you want more tools, you should be prepared to pay more.
If you need a multitool to fix a lot of things, or to simply offer you reassurance when you’re out in the wild, you might want to pay a little more. You should look for a tough tool that offers you a lot of different components while being safe to use and store in your pocket. If you only need a multitool to help you cut a bit of wire now and again, and to screw in some bolts, you may not need to spend very much money on one at all.
Multitools can ultimately be a lifesaver if you find yourself in an emergency situation, however, they can also be ideal for use around the home, when you’re camping, or when you’re on the trail. No matter why you need a multitool, or what you want to use it for, we are confident that you will find the multitool you need above. Take a look at the 5 tools that we believe are the best on the market right now, and get that little bit closer to finding the multitool you need to get a range of jobs done.
If you are looking to do a spot of carpentry or wood working you are going to need a coping saw. The right coping saw can help you to get those jobs done quickly, and with little fuss. However, there are so many different coping saws on the market these days that it’s often hard to know which saw really is the right one for you. Here is where we have come in and helped: we have selected 5 of what we believe to be the very best coping saws on the market right now, making choosing the best saw just that little bit easier.
The size of the saw that you end up buying will ultimately depend on the size of the blade you need. The size of the blade can vary between 4 and 6 inches, and this measurement is the distance between the frame and the blade. This area is typically known as ‘The throat’.
Your choice of blade will depend on the type of work that you’re planning to undertake, however, some 4-inch blades can be just as good as some 6-inch blades. One tip when you’re looking to buy a particular sized saw is to take a look at the packaging and see what the saw can be used with. Once you have found a saw that is ideal for the job that you need doing, try to find some replacement blades that fit in the saw. Some blades will be made by the very same manufacturer, whereas others will be made by someone else, but they may still be compatible.
The shape of the blade that you buy will be fully dependent on the job that you want to do. For example, if you plan on cutting wood, you will need a blade that is fine or coarse. If you wish to cut tiles, you will need to look for a carbide-encrusted tungsten wire. If you would like to cut plastic, you will need to use a blade that has helical teeth. These are teeth that allow you to cut into the plastic in all directions.
The price that you pay for your coping saw will depend on a few things:
If you take a look at the saws above you will see that they are all priced differently. Each of these saws are known for their quality, but if you do not want to pay $86 for a saw that you won’t use very often, you may be happier with a much lower price. Some cheaper saws are thought to be just as good as some of the more expensive brands, but again it depends on what you want to use the saw for, and how often you wish to use it.
If you are only planning on using your saw once or twice a month, you may want to opt for the cheapest saw, as you won’t need to spend too much money on it. However, if it’s important that you have a really good quality cut each and every time, it may be worth your while spending more money on a coping saw.
The range of materials that you can use you coping saw on will depend on the blade that you’re using.
Wood - Different coping saws come with different blades, and it’s the difference in the blades that can make the saw ideal for use on a wide range of materials. Some blades are ideal for use on wood, and these blades are usually fine or coarse. The fine blades can cut tight curves, but they are a little slower to use however, they are ideal if you wish to cut a small curve.
Coarse blades have less than 15 teeth per inch, and this means the blade can cut the wood quite quickly, making it ideal when you need to cut a straight line.
Metal - Some blades are made from high carbon steel, and it’s these blades that make the coping saw ideal for use with metal.
Plastic - Place a blade that has helical teeth into your coping saw, so that it can cut plastic.
Tiles - If you would like to cut tiles with your coping saw, you will need to use a carbide-encrusted tungsten wire, so that you can do the job smoothly and relatively easily.
As we have already seen, the shape of the blade that you by will be fully dependent on the job that you want to do. For example, if you plan on cutting wood, you will need a blade that is fine or coarse. If you wish to cut tiles, you will need to look for a carbide-encrusted tungsten wire. If you would like to cut plastic, you will need to use a blade that has helical teeth. These are teeth that allow you to cut into the plastic in all directions.
If it’s likely that you’re only going to be cutting wood, it would be wise to opt for a fine or a coarse blade. Coarse blades can help you to cut the wood quickly, making it so much easier if you want to cut the wood in a straight line.
Please make sure you only ever use the right blade, as using the wrong type of blade will result in a less-than-perfect cut, and you could ultimately damage the blade, and the surface you’re trying to cut. Please make sure you always wear suitable protection, as there is always a chance that the blade could snap, particularly if you’re not using the right blade for the job.
The life expectancy of your blade and the coping saw itself will depend on how often you use it, and if you look after it. For example, an $86 coping saw could last just a few months if you don’t take care of it, fail to clean the blade, and you don’t store it properly. Alternatively, a very cheap saw could last for years if you take good care of it, store it properly, and always clean the blade after use.
It is hard to say exactly how long a coping saw will last, but if you keep it clean, make sure the blade is tight, you could potentially lengthen its life.
There are some great coping saws on the market right now, and we believe that the above 5 saws are the best out there. Choose from one of the above coping saws so that you can get your wood working and carpentry jobs done quickly, using a saw that works well for you.