Are you someone who goes working in different places and needs a good quality work surface? If so then a workbench is a very wise option. Providing stability and a flat secure surface, it is a perfect investment.
This product is an aluminium stand and wooden worktop workbench, and much more. This workbench has four different positions it can be changed into. One, it can be use a very stable workbench with an additional drill holes tool tray and saw slot giving a place for everything so don’t have to put it on your work surface or on the floor. Two, you have the step that can hold up to 650 Lbs of capacity and has anti-slip step board. Three, if you fold it flat and take out the wheels at the bottom it can be used as a slider for doing maintenance under a car. Four, buy fulling up the handles you can turn the slider into a heavy lifting trolley. It weighs 48.5 pounds and in size is 47.4 x 24.4 x 4.6 inches.
- It is a four in one
- It is made of aluminium so it is solid
- It weigh it total 49.5
Our top Workbench pick is the Black & Decker WM425. In addition, it has a four star rating from the customer reviews. The stand is made out of Steal and is coated in a black cover. It can hold up to 550 pounds, which is more than 14 times its own weight. The Work top a varnished wood, which has different markings and measurement to help you out on your task. In addition it has a one handed clamp system that opens up the middle of the wood, you place the object in there, then you close it and it will stay in that fixed position. This work benched can also be manoeuvred into four different positions, allowing full versatility in using this product. It weighs 38 Pounds and its detentions are 31.2 x 28.9 x 30.3 inches.
- It can hold up to 14 times its weight
- It can be maneuvered into four different positions
- The working surface is not massively big
The HICO 4-in-1 is the down grade of the 5-in-1, however is not any worse quality. With an aluminium finish and 5 star review it is a great workbench and something to get invested in. it has a saw slot, drill hole and tool stray when using the workbench configuration. The workbench also have marking and measurements to make your job easier. Then it has the anti-slip step board for giving you a hand up. Panultimately it has a creeper carrier that can hold heavy weight to make them easier to manoeuver. Finally, it can be put into a small fully folded form for taking it hassle free from place to place.
- It is a multi-functional workbench
- It is rated 5 stars from customer reviews
- It folds flat but still has a big surface area
The Black decked is made out of steel and coted in a black paint, which is water prof, and scratch resistant. It has a woodwork top with a varnish that prevents objects on it from sliding abut. In addition, it has a clamp in the middle, using the winding leavers that move the two parts of wood that put together the work top. The whole structure can hold 350 lbs plenty for doing all the work you need. To carry it about you can just fold it flat making it easy and simple to move from place. In total, it weighs 1.4 pounds, which is incredibly light, theoretically a child could carry it. The detentions are 33.3 x 5 x 5 inches, and if you are still not sure, it comes with 2 a year warranty.
- It only weighs 1.4 pounds
- It comes with a 2-year warranty
- It is not very big
The Keter folding workbench provides a strong work area that you can take to any project. You can rely on this table to allow you to do any job from doing the sanding, cutting metal to hammering in nails into wood. The durable legs will not let you down being able to do any task you need. It is also equipped with a set of clamps helping you out even further. They are also one handed so while holding something you can clamp it and it will hold it securely in place. The Keter workbench provides ample space on the work to and can hold up to 1000 pounds. Withstanding its heavy-duty capacity’s it can easily fold up into a flat and compacts size, making it easy to carry and move around. It is a size of 21.7 x 33.5 x 29.7 inches and weighs 26.9 pounds.
- It can hold 1000 pounds in capacity
- It includes a set of clamps
- It is made of plastic
When looking for portable workbenches you need to consider these factors. One, you have to find out the weight of your workbench. There is no point finding a really high tec. one, if you cannot actually manoeuver it. Two, when you are moving it about you are going to find it a pain if you go to take it in the van or care are simply store it somewhere and it is too big. If you have a big, space gobbling workbench you may as well get a rolling workbench or tool chest as they can still move but when stationary are more sturdy and are generally bigger. However, back to workbenches you want something that can fold into as small as possible. Three, the material of your workbench is a big factor that will narrow down your search significantly and will be different for different tasks, therefor it is definitely a factor you should take into consideration. I will explain these factors in more detail in the paragraphs below.
When deciding a weight you need to think carefully, because you could go for the lightest one and it could be a very cheap plastic that wobbles and breaks and you will end up with a broken work bench and 50 dollars out of pocket. Therefore as a general rule anything in the low 20 pounds either is bad quality or is much smaller than you think. Now on to too heavy. As I said before you can attach a lode of things onto a workbench that look good but will put on the extra pounds on and will be impractical. Choosing one of these big objects will, for starters, be a pain. Then they will get so annoying that it will discourage you from moving it, therefore you will defeat the purposes. So as a rough guide do not go above 60 pounds, and be aware that between 50 and 60 pounds is getting on the heavy side of things. Which only leaves between 30 and 40. This is an ideal weight to choose, not to heavy that you can lift it but not too light which will leave you 50 dollars short.
The biggest problem people have with size is that you see a table on the internet that you think is a bargain until I arrives and you find it only coms up to your knees. You may think that “I would not do that” until is 10 times too small. So for starters, you want your workbench to be around hip height, allowing you to bend over and lean on it but not have to find yourself kneeling or crouching. In addition, if you have a workbench any bigger than that you will find that it will not be easily portable. Which brings me on to my next point. Preferably, you want your workbench when you are moving it or storing it, to have a small surface area. Giving you more places to put it and means, you will not have a problem moving it from place to place.
There are so many different combinations of materials you can choose from when looking at workbenches. The materials you can use are wood metal or plastic. However sometimes you will have a metal stand but wooden worktop, or a metal stand with a plastic top, or a plastic stand with metal on top etc. Therefore, you need to think of what would work best for you. However, there is a difference in quality when you go through the various options. Therefore, plastic is thinner, not as strong, and will scratch easily. Stand wise it is the most unstable, therefor heavy loads will be sensible which is not ideal when you are trying to do cutting or measuring heavy objects. As a work top it would be made of thick plastic however that will not help it from getting groves and carve marks which isn’t a problem for a while until the groves and scrapes make it flimsy or uneven which means some time in the not long future you will have to buy another. Metal is price wise above plastic and around the same mark as wood. It is found in most workbenches in the stand section, as it is strong stable but not as heavy as wood. It also folds quit well. As a worktop, it can be very long lasting and hardwearing. Wood is most commonly found I the worktop of workbenches. It is dense high quality but alto heavier to carry. You also find that the manufactures do not usually put a fold in the middle resulting in that it is, to store and manoeuver, much harder. Are Top Material would be a metal stand with a wooden worktop.
I hope that this article has given you some insight into workbenches and you have a better grasp on what you are looking for. Maybe it have given you the thing you were looking for. If so, that is a bonus!
If you have any other questions or worries please contact us, or if you have any comments or improvements please leave a comment at the bottom of the page