1

Best Orbital Sander 2018 Reviews and Comparisons

When you need an orbital sander, so you can undertake a wide variety of jobs you need one that will allow you to get your jobs done properly. This is where we can help: We have selected 5 of the best orbital sanders on the market, and doing this will make your search easier as you won’t have to sort through the less-than-perfect orbital sanders to find one that works for you. Take a look below for more information:

So, What are the products on offer?


At Number One...

DEWALT DWE6423K

The DEWALT DWE6423K Variable Speed Random Orbit Sander comes with the classic DEWALT black and yellow finish, and a dust-sealed switch which gives it a lot more protection. With a 3.0-amp motor that allows the pad to spin between 8,000 and 12,000 OPM, this orbit sander may be exactly what you need.

Manufacture:

DEWALT

Modal:

DWE6423K

Weight:

4 Pounds

Power:

3.0-AMP

Sold for approximately $79, and with the ability to reduce vibration thanks to the 3 counterweight design, the DWE6423K will be a little easier to use than some. Measuring 7.25 x 10.38 x 6.2 inches, and weighing 4 pounds, this orbit sander has a dust collection system and is ideal for use when you want to sand metal, wood, and plastics. With a reputation for being a great sander that works well, this could be the sander for you.


At Number Two...

Bosch ROS20VSC

The Bosch ROS20VSC Random Orbit Sander has a tough-looking finish, and a variable speed dial that allows users to adjust the speed as they wish. The microfilter system helps to trap fine particles, thereby helping to keep the work area clean and tidy. Sold for approximately $59, and with a twist-off canister, users can see the dust level, and remove the canister easily whenever they need to.

Manufacture:

Bosch

Modal:

ROS20VSC

Weight:

3.5 Pounds

Power:

12,000 OPM

Measuring 9 x 5 x 6 inches, and weighing just 3.5 pounds, this is the lightest orbital sander we have seen so far. Made to get rid of those swirl-marks that you associate with sanding, the Bosch has a soft grip top and body, meaning users can hold the sander exactly where they want to. With an 8 foot cord, and complete with a contractor bag, the ROS20VSC could be exactly what you need. This particular sander has a reputation for being ideal for wood working and good at collecting dust, making it a very good buy.


At Number One...

Makita BO5041K

The Makita BO5041K 5-Inch Random Orbit Sander Kit is sold for approximately $95, making it the most expensive orbital sander we have seen so far. However, it does come with a 3.0-amp motor, a variable speed control dial, and adjustable front handles that allow the user to sand in small areas and in corners too. With a 1/8 inch random orbit action that allows smooth sanding, and with a pad control system that lets the user control the speed from the moment they switch the sander on, the Makita seems to be outshining the rest.

Manufacture:

Makita

Modal:

BO5041K

Weight:

3.09 Pounds

Power:

3.0-AMP

Weighing 3.09 pounds, and measuring 7.5 x 16.3 x 10.3 inches, the BO5041K is lighter than the previous models which is impressive because it’s certainly not smaller. With a 2-finger trigger switch for safety and a reputation for being an excellent sander, the Makita may be well worth considering.


At Number One...

DEWALT DWE6421K

The DEWALT DWE6421K Random Orbit Sander Kit comes with the traditional DEWALT black and yellow finish, along with a bag for storage. The 3.0-amp motor keeps the pad spinning at 12,000 OPM, and the dust collection system has been improved so work areas are cleaner than ever before. The one-hand locking system is very convenient, and the separate counterweight helps to reduce vibration allowing users to carry on working with ease.

Manufacture:

DEWALT

Modal:

DWE6421K

Weight:

4 Pounds

Power:

3.0-AMP

Measuring 10.4 x 7.2 x 6.2 inches, and weighing 4 pounds, this is the same size as the DEWALT we saw earlier. Ideal for use when sanding wood, metal, and plastic, the DWE6421K has an interfacing system that’s ideal for use with DEWALT’s vacuum locking system. Sold for approximately $59, and with a reputation for being a very good sander that picks up speed quickly, this could be the orbital sander you need.


At Number One...

Black & Decker BDERO100

The Black & Decker BDERO100 Random Orbit Sander comes complete with the orange and black finish that everyone knows, and a hook and loop system that makes changing the sandpaper a lot easier. Sold for approximately $25, this is the cheapest orbital sander we have seen so far.

Manufacture:

Black & Decker

Modal:

BDERO100

Weight:

3.16 Pounds

Power:

2 AMP

Measuring 7 x 5 x 6 inches, the Black & Decker is not the largest sander we have come across, and its size could make it ideal for use in smaller areas. Weighing 3.16 pounds, this model is also one of the lightest we have seen, which means it’s ideal for use for longer periods of time. Complete with a soft backing pad, sanding disc and a contractor bag the BDERO100 has a reputation for being a very good sander that’s easy to use.


Buying Guide…


Power

While many different orbital sanders tend to offer different levels of power, it isn’t absolutely vital that you purchase an orbital sander that has a lot of power. This is because the more power an orbital sander has, the heavier it will be. If you do decide to buy a sander that comes with a lot of power, it may be too powerful to get some smaller and more intricate jobs done. The most important aspect of an orbital sander is what it can do for you in terms of options, settings, price, weight, and accessories. Therefore, it would make a lot more sense to think about these factors than the weight itself.


Model

The orbital you end up buying will depend on a few factors: How much money you want to pay for it, how often you’ll use your nice new sander, and the size of the jobs you’ will be undertaking.

- Price

The amount of money you’ll pay for you nice new sander is likely to reflect its quality. Although this is not always evident, it does make a lot of sense. If you choose to buy a cheap orbital sander instead of a more expensive one you’re not going to come away with a really good finish. However, some of the cheaper orbital sanders will let you undertake a few jobs without very much trouble at all.

When it comes down to it, the more money you pay for your sander the better it may be simply because it will be built from better materials.

When it comes to middle-of-the-range sanders, they can be almost as good as some of the more expensive models but this isn’t always the case. Make sure you undertake a spot of research and read some customer reviews and comments. These are likely to give you a good indication as to how good the orbital sander really is. This is because consumers don’t tend to lie about how good or bad the product they have purchased is. This means you can make a more informed decision about your new orbital sander, and that’s never a bad thing.

- How often you will use it

If you’re not going to use your orbital sander very often (Such as every week) you won’t need to spend much on it. However, if you do plan to use it fairly frequently (Such as 2-3 times a week), you may want to spend a bit more money. Spending a little more money means you could end up with a sander that is strong, works well, and has a few different features.


Weight

Not everyone is aware that the weight of a sander is an important factor.  However, if you don’t think about the weight of the sander you may end up buying one that is too heavy. If you buy a sander that is too heavy, you may not be able to use it as much as you want to. This is because you might not be able to use it for more than a few minutes at a time. This ultimately means the jobs you want to get done before the weekend may not get finished at all.

Please note that while you’re using your new sander you don’t have to put all your weight on it. You won’t have to lift it up very often, either, but the heavier it is the harder your new sander will be to use.  If you want to buy a very heavy and robust orbital sander, you should be prepared to use it more than once a week. This is because a sander such as this would have been manufactured for frequent use. However, if you don’t want to buy a heavy sander and you want a lighter model instead, please note that it may cope with occasional use.


Questions We Are Frequently Asked…

Corded or Cordless?

Corded sanders can be absolutely ideal if you want to have a powered corded sander, rather than having to find and then charge a battery. However, you should always make sure that there are enough power outlets nearby as your new sander simply won’t work without one.

Some corded orbital sanders come with a very long cord, which means users should be able to reach the wood, metal or plastic that needs sanding. If you don’t think an 8-foot cord will be long enough, you may want to think about using a cordless sander instead.

Cordless sanders can be a bit of a winner if you constantly find yourself working in different places. As long as you have charged the battery and you have a spare one to hand, you should be able to use your new cordless sander without much trouble.


Why get an Orbital Sander?

An orbital sander typically has a random orbit sander has a round pad, and this pad moves that sander in random orbits. What this means is that it vibrates in very small circles, quite like an orbital finishing sander. This means that an orbital sander has the ability to undertake a lot of jobs on different materials such as wood, metal, and plastics. This means you can get a lot more jobs done around the home, in the garage, and in the workshop.

Many orbit sanders come with a grip that’s very easy to hold and use. This can make sanding less of a chore, especially if you’re going to be using it for hours on end.

More modern orbit sanders no longer leave a pattern of sanded circles behind them. Older models and some other pieces of equipment can tend to do this, which isn’t ideal. If you would like a smooth finish, without having to sand for hours at a time, an orbital sander can be absolutely ideal. Some even come complete with a contractors bag, which makes storage so much better, and it means they’re often easier to transport from place to place too.


In Conclusion…

If you are in the market for a new orbital sander, we hope that your new model can be found in the list above. Please take a look at the above sanders once more so you know which ones you would like to opt for. A good orbital sander should allow you to get a lot of jobs done with ease, so make sure you buy one as soon as you can, so you can get every single one of those jobs done in no time at all.

If you have any other questions or worries please contact us, or if you have any comments or improvements please leave a comment at the bottom of the page.

hometoolhelper
 

Click Here to Leave a Comment Below 1 comments
Junko - May 13, 2018

Great, yahoo took me straight here. thanks btw for post. Cheers!

Reply

Leave a Reply: