When you need to get a lot of different jobs done you may find yourself in need of an oscillating multi tool. The trouble is that there are usually a lot of different brands on the market these days, making it hard to find one that will suit your needs perfectly. Here is where we can come in and help: we have chosen 5 of what we think are the best oscillating multi tools on the market right now, thereby narrowing your search down and making your choice a lot easier. But remember that sanding creates a lot of mess so if you are interested in buying a sander like this, have a look at dust collectors. Back to oscillating multitools look below for more information:

At Number One...

Bosch GOP40-30B

The Bosch is also complete with a bag for easy storage, and it is sold for approximately $180. With a 4.0-amp motor that also comes with reinforced metal gearing, the GOP40-30B releases blades very easily making it ideal if you want to change accessories quickly so you can get a lot of work done. Measuring 11 x 2.5 x 3.8 inches, and weighing 3.3 pounds, this could be the oscillating multi tool kit you need.

At Number Two...

DEWALT DWE315JK

The DEWALT DWE315JK Multi Material Corded Oscillating Tool Kit is a tough-looking piece of equipment that comes with a storage box and a 3-amp motor. Sold for approximately $99, and complete with an LED light, users can see exactly where they’re working, even when there isn’t much light. The DEWALT comes with a guide system, fast cut wood blade, semi-circle blade, sand paper, sanding blade, accessory adapter, and more.

Weighing 7.2 pounds the DEWALT is quite heavy, and measuring 17.2 x 5 x 9.8 inches it is bigger than the Bosch oscillating tool, but it also comes with a quick-change system making it easy to switch between accessories. With a reputation for being well worth the money, this could be the ideal oscillating tool for you.

At Number Three...

PORTER-CABLE PCE606K

The PORTER-CABLE PCE606K Oscillating Multi Tool Kit comes with a 3 position over-mold handle, an 8-foot cord and a variable speed dial meaning users can work from 10,000 to 22,000 oscillations per minute. Sold for approximately $94, and complete with a kit bag, this could be the multi tool kit you need.

Weighing just 4.7 pounds this is not the heaviest multi tool around, making it ideal for use over long periods of time. Measuring 15.8 x 4.5 x 8.5 inches and complete with a wood/metal blade, a wood blade, sanding plate and sand paper, the PORTER-CABLE also comes with a kit bag so you can store all your accessories with ease. With a reputation for being the must-have tool, the PCE606K could be ideal if you want to get a lot of work done around the home or in the garage.

At Number Four...

Makita TM3010CX1

The Makita TM3010CX1 Multi Tool comes with a 3-amp motor, a variable speed dial, and 3.2 degree oscillation angle so users can cut and sand at a faster speed. Made so that there is reduced vibration, and less noise, the Makita multi tool also comes with a large on and off switch which makes controlling it so much easier.

Sold for approximately $160 and weighing just 4 pounds, this tool is lighter than many others making it easier to use for long periods of time. Measuring 16 x 5 x 8 inches, and complete with a tool-less clam system which makes changing accessories so much faster, the TM3010CX1 also comes with a tool case. Ideal for use when sanding, cutting, scraping, and removing grout, this multi tool has a reputation for being a great multi tool for the price.

At Number Five...

Dobetter OT2832

The Dobetter OT2832 Variable Speed Oscillating Multi Tool Kit is sold for approximately $40, making it the cheapest tool we have seen. Complete with a red and black finish, the Dobetter comes with a 2.8-amp motor and a tool-free clamping system which works to prevent slipping while it’s being used.

Ideal for use when sawing, sanding, removing tiles and much more, this multi tool also comes with an LED work light enabling users to work with ease even in those tricky dark places. Weighing 5.3 pounds, this isn’t the lightest tool we’ve seen, but it isn’t the heaviest either, and measuring 15.7 x 6.3 x 4.1 inches, the OT2832 has been built to last. With a reputation for being the ideal multi tool for occasional use, this could be the one you need.

Buying Guide…

Power

When it comes to opting for the most powerful oscillating multi tool you should be aware that you shouldn’t necessarily look for the tool that provides the most amps. What you need to look for when you buy a multi tool such as these is the oscillation rate. The oscillation rate is measured in OPM (Oscillations per minute) and the higher the oscillation rate is, the more power your new multi tool has. But that’s not all, the more power your nice new tool has, the more work it will be able to do.

Most oscillating multi tools come with a range of speeds, and the wider the range the more flexible your tool will be, and this ultimately means that you will have a lot more finishes and options available than tools that have just one speed.

Ideally, you should opt for a tool that comes with 8,000 to 22,000 OPM, as this means it’s a very reasonable tool. Please note that some jobs will require you to adjust your tool to a slow speed, whereas others will need a much higher speed. Whatever jobs you’re undertaking if you can have a tool that allows you to get full control at all times, you’re onto a winner.

Another important option to consider is the oscillation angle. This angle is likely to range from approximately 2.5 degrees to 3.2, but this does depend on the tool you buy. The angle shows you how much each of the accessories can move from side to side when the multi tool is being used. The higher the angle the more powerful the tool will be. If you want a good level of precision then you’ll want to use a tool that comes with an angle of 2.5 degrees, however, if you are looking to cut wood as quickly as possible, then an angle of 3.2 may be absolutely ideal.

Accessories

Every oscillating multi tool that you’ll come across will have a wide variety of accessories with it. Some of the accessories will be ideal for cutting wood, others will be perfect for cutting metal, and some will save triangular pads that are for sanding. There will be accessories that come with carbide or diamond-edged blades that are ideal for use on masonry.

Once you have purchased your new oscillating multi tool you will see that the manufacturers have added a few different accessories and blades to the kit. Some kits will also come with a case or a tool bag that is ideal for storing your accessories and the tool itself in.

Please note that some of the cutters, grinders, and blades will wear out over time, as will the other accessories. The good news is that they can be replaced, and some manufacturers make their tools compatible with other brands.

Weight

The lighter the multi tool is, the better particularly if you’re working with it for longer periods of time. However, the heavier models could be more resilient to knocks, scrapes, and being dropped. If you think your oscillating multi tool will be knocked about, stood on, and bashed around then you should consider a heavier model. Please note that some of the heavier models tend to be slightly more expensive than some of the lighter ones.

If you want to opt for a lighter model, please make sure that you keep it in its bag or case when it’s not being used. Always position the tool so that you know where it is at all times, and you do your best to avoid damaging it.

Questions We Are Frequently Asked…

In Conclusion…​

If you are in the market for an oscillating multi tool, the wide range of brands and models may make your choice somewhat difficult. This is where we hope we have been able to help: take a look at the 5 oscillating multi tools above, and choose one that will help you undertake all of the jobs you need doing.

If you have any other questions or worries please contact us, or if you have any comments or improvements please leave a comment at the bottom of the page.

If you need to get a lot of different jobs done, chances are that you’ll need a precision screwdriver set. Allowing you to undertake less regular jobs around the home while also mending cell phones, computers, and more, the right precision screwdriver set could be just what you need. For more regular jobs you may want you use either an electric screwdriver or a ratchet screwdriver. However back to the precision screwdriver, finding the set is not always that easy, but the good news is we can help. We have selected what we believe are 5 of the very best precision screwdriver sets on the market right now, making your hunt for the best set so much easier. Take a look below for more information:

So, What are the products on offer?

At Number One...

JACKLY 45 in 1

The JACKLY 45 in 1 Professional Portable Compact Screwdriver Kit is a unique screwdriver kit that comes with 45 fittings so that you have all of the parts you need to get a wide range of jobs done with ease. Sold for approximately $9.50, the kit is certainly a cheap one, and complete with tweezer tips and an extension shaft, this could be exactly what you need.

Weighing just 1.8 pounds, and measuring 6.1 x 4.3 x 1.2 inches, the JACKLY comes complete with a case allowing you to put the screwdriver parts back where you got them from, so you can find them the next time you need them. With a reputation for being easy to use, this kit could be ideal for those occasional jobs around the home.

At Number Two...

Syntus 63 in 1

The Syntus 63 in 1 Precision Screwdriver Set is an impressive looking set that comes with 57 different bits enabling you to undertake a wide range of jobs. The multi-magnetic driver allows you to add the bits and remove them with ease, and the bits have been made so users can repair a wide range of Apple devices and games console controllers.

Sold for approximately $15, the set also comes with a prying tool that also allows you to slide and separate objects. Measuring 8.5 x 6 x 12 inches, and weighing 13.6 ounces, the Syntus has a reputation for being high quality and very functional.

At Number Three...

ORIA 76 in 1

The ORIA 76 in 1 Screwdriver Set is a very impressive-looking kit that comes with 76 pieces, a flexible shaft, and a portable bag so it can be taken from place to place. Sold for approximately $30, the ORIA is slightly more expensive than the previous kits, but there is a good reason for it. With a SIM care ejector pin, spudgers, a ruler, an LCD suction cup and much more, this screwdriver set could have everything you need.

Ideal for use when repairing cameras, glasses, computers, tablets, and watches the ORIA weighs 1.5 pounds and measures 10 x 4.5 x 2.3 inches and comes with a skid-proof and anti-static driver. Made from CRV steel, and with 60 different screwdriver pieces, this set has a reputation for being strong and sturdy.

At Number Four...

NANCH 23 in 1

The NANCH 23 in 1 Precision Small Screwdriver Set is a modern looking set that comes with 22 tips and an impressive looking screwdriver. Complete with Philips tips along with slotted, torx, security torx, pentalobe, tri-wing and more, this may be the screwdriver set you need to get a lot of jobs done. Sold for approximately $25, the NANCH comes with a metal telescopic driver that has been designed to give you a longer reach, and the anti-slip design enables you to turn it precisely time and time again.

Measuring 5.7 x 4.1 x 1.1 inches, and weighing 9.4 ounces, this set includes tips that have been made from S2 alloy steel, making the tips as strong as they need to be so you get the work done with ease. With a reputation for being a good quality set, it may be exactly what you need.

At Number Five...

Stanley 66-039

The Stanley 66-039 6-Piece Jewelers Precision Screwdriver Set is sold for approximately $8.05, and comes with swivel head handles that help to provide reach and precision. With a storage case that comes as standard, and the ability to resist corrosion, the Stanley 66-039 comes with 2 Philips tips, and 4 slotted tips of varying sizes.

Weighing just 3.2 ounces, and measuring 6 x 3.2 x 0.9 inches, the screwdriver set has plated shafts that ensure the user has a solid and steady grip every time. The plastic storage case is ideal for those who want to keep their screwdrivers tidy, and the steel blades have been tempered and hardened so they last longer. With a reputation for being good quality, this set could be the ideal one for you.

Buying Guide…

Material

Many different screwdriver sets are made out of different materials, and they all claim to be quite strong. This could make it hard to understand which of these materials is the strongest. Chrome vanadium steel is thought to be the very best material to use when making screwdrivers and their bits, however, products made from chrome vanadium steel are usually quite expensive. With the ability to last for years no matter how many times you use bits made from this material, if you want the very best, you will need to pay for it. Precision screwdriver sets that are made from this material are typically found in workshops and professional garages as those working with them need screwdrivers that are strong, durable, and reliable.

S2 alloy is also thought to be one of the better materials, simply because it’s one of the most durable around. However, if you are thinking of choosing a precision screwdriver set that comes with some reinforced steel, you won’t go wrong. Reinforced steel is pretty tough and durable at the same time, making it ideal for frequent use around the home, or in the garage.

Chrome-plated steel is reasonably ok, and some of the cheaper models come with chrome-plated steel parts. This material does make the parts really good value for money, as it adds a bit of strength and durability.

If you opt for nickel-chrome molybdenum, you will be getting a screwdriver set that is at the bottom of the price and quality range, but that doesn’t mean it won’t last. If you’re looking for a good quality screwdriver set that is ok to use now and again then nickel-chrome molybdenum will do reasonably well.

When it comes to choosing materials, if you can opt for chrome vanadium steel as this is the very best, but if you want something that is ultimately good value for money then it would be wise to choose either chrome-plated steel or S2 alloy. The choice is yours.

Bits

The number of pieces you need ultimately depends on the types of jobs you’ll be undertaking. If you’re only going to be working at home on a few jobs around the house, it’s unlikely that you will need anything bigger than a 23-piece set. However, if you are going to be working on much larger jobs, and mending more things (Such as cell phones, computers, watches etc.) the more pieces you have, the better.

If you’re not sure how many pieces you will need, think about the types of jobs you are going to do. Sure, you may want to be able to fix computers and glasses, but if you’re only going to be working on little jobs here and there a 23-piece set is probably more than sufficient.

Price

The price that you’re going to end up paying for your precision screwdriver set will depend on how much you want to spend and how many bits you’ll need. If you want to spend as little as possible, then you may want to opt for a screwdriver set that is less than $10, but please note that it won’t come with a wide range of bits. If you want to spend a lot more on your new set then you will need to be prepared to pay at least $30 for 70+ bits.

If you do find a screwdriver set that has a lot of bits for not very much money, please be aware that the quality may not be very high. Typically the more money you pay, the more bits you will get, and the higher quality they will be. You may get lucky with a middle of the range set, but if you want a lot of bits that are of a high quality it’s always best if you pay a little more.

Questions We Are Frequently Asked…

Should I buy one screwdriver with multiple bits?

Yes, that is if you would like to undertake many different jobs. If you think you’re only ever going to be undertaking a few jobs, it may be worth your while buying 2-3 screwdrivers as they may be all you ever need. If you think you’re going to be doing a lot of different jobs, having one screwdriver with multiple bits could come in quite handy. This is because that one screwdriver can be used for many different projects, for example, if your next job requires you to use a Philips screwdriver, you’ll have one to hand, if another requires you to use a Hex screwdriver of a specific size, you’ll have that to hand as well. This is because the bits/parts can be interchanged, making your life easier, and leaving you a lot more room in your toolbox.

If you think you’re going to be using one particular type of screwdriver quite a lot, you may want to think about buying a screwdriver that is of a specific size. Then, purchase a screwdriver with multiple bits so that you can use those bits, without wearing down the Hex bit for example, that you use all day, every day.

What bits are most important?

While there are many different bits out there, there are four bits that seem to be the most important, these are the flat head, torx, Philips and Hex bits. These seem to be the most important because they tend to be used a lot more than any other bits. If you are in the market for a new screwdriver set, you need to make sure that your new precision screwdriver set comes with these four bits.

Of course, if you tend to use screwdrivers almost every day, chances are you will use other types of bits as well, meaning you should be on the lookout for these when you’re considering buying a new set. Most of the sets have the details you need on their packaging, or on the website where it is sold. Read the information so you can determine whether that particular set is the one you need.

Please note that some of the more expensive screwdriver sets will have a wider range, meaning you’re more likely to get the bits that you want.

In Conclusion…​

If you need a lot of different screwdriver bits to help you get a wide range of jobs done, you’ll need a screwdriver set that has a lot of different sized bits. Above you will find 5 of the best screwdriver sets on the market right now, and we hope you can find the right one for you, so you can get your jobs done soon, and with ease.

If you have any other questions or worries please contact us, or if you have any comments or improvements please leave a comment at the bottom of the page.

If you have a lot of tools you’ll need to keep them somewhere safe so they don’t get lost. You’ll also need to keep all of your tools together so that if you frequently move from location to location, or you simply need to have access to them. Here is where a toolbox can come in handy. When shopping for a tool box, you will need to make sure that you purchase one that is strong and sturdy enough for all of your tools. Here is where we can come in and help. We have selected 5 of the best tool boxes on the market right now so that finding the right one is that little bit easier.

So, What are the products on offer?

At Number One...

DEKO 168pcs - Best With Tools

The DEKO 168pcs Tool Box is a very sturdy looking toolbox that comes with a black and yellow finish. Complete with tools that are ideal for use around the home or with auto repairs that DEKO comes with 168 pieces that have been made from high-quality steel. Sold for approximately $85, this tool set comes with ratchets, wrenches, precision screwdrivers, sockets, a tape measure, hammer, and pliers.

Measuring 19.4 x 14.9 x 5.4 inches, and weighing 15.1 pounds, this isn’t the smallest or the lightest tool box, but it does come with a wide variety of tools that could prove to be just what you need. With tools that have been made to a professional grade and a toolbox that is easy to carry thanks to the handle, the DEKO 168pcs tool box is the best tool box that comes with tools. With

At Number Two...

DEWALT Toolbox - Best Without Tools

The DEWALT Toolbox Organizer comes with a black and yellow finish, as well as a padlock hasp lock that helps to keep your tools safe and secure. If you are looking for a tool box that can be carried around with ease, without worrying whether it will open up when being carried, this could be the one for you. Made from tough plastic that has been built to last, and water-resistant, the DEWALT comes with a lid that can also be used for storage.

Measuring 21 x 13 ¼ inches (Width and depth), and ideal for use with a trolley that has been specifically made to carry tool boxes, the DEWALT Tool box is ideal for storing power tools, and other tools such as hammers and wrenches. Considered to be one of the very best tool boxes that comes without tools, this tool box could be ideal if you have a lot of tools that need to be stored safely.

At Number Three...

Vastar 102-Piece

Complete with tools that are easy to take out and put back in again, the Vastar toolbox will ensure that you have your tools to hand when you need them the most. With handles that have been ergonomically designed and a carry case that is compact, this is possibly one of the lightest toolboxes that is complete with a range of tools. With a reputation for being a good quality tool kit, this could be exactly what you need.

At Number Four...

OUTAD 82-Piece

The OUTAD 82-Piece Tool Set comes with a wide variety of tools that make the OUTAD ideal for use around the home and in the garage. This set that has been made to use when you’re first starting out has been heated treated and comes with a chrome plate to ensure that the tools stay strong, durable, and are corrosion-resistant. Complete with screwdrivers, a tape measure, pliers, utility knife, Allen keys, a hacksaw, claw hammer, electrical tape and more, this set looks like it means business.

Measuring 13.8 x 10.2 x 2.8 inches and complete with a carry case to help you store the tools neatly and with ease, the OUTAD has a reputation for being a good tool set that has a lot of useful tools.

At Number Five...

Stanley STST19900

Sold for approximately $38, and measuring 12.3 x 9.6 x 19.9 inches, and weighing 6.2 pounds, the tool box will be heavier once you’ve added your tools. The top of the tool box comes with yellow flaps that hide storage spaces, allowing you to store even more than you realized, and the bottom container allows for even more storage making this one of the handiest tool boxes around.

Buying Guide…

Portability

If you think you will need to move your tool box from one place to another you may want to look for one that comes with wheels, or can be attached to a trolley. Alternatively, if you’re happy to pick up a tool box and take it with you, you should make sure that it has a strong handle that can support the weight of the tool box. If you’re not sure that the handle is strong enough, remove some of the heavy tools, and lift the tool box gently.

Weight

The weight of the tool box itself is quite inconsequential, however, when it is full of tools, there can be a lot of additional weight. If you plan on filling your tool box with many different tools, you need to make sure that it can hold and support their weight. If you have a lot of heavy tools, you may want to opt for a tool box that is made from metals rather than toughened plastic. Metals are better at supporting the weight of your tools, which may weigh in excess of a few kilograms.

Sections

Most tool boxes come with different sections, allowing you to keep the heaviest tools in the bottom of the tool box, and the lightest tools in the top. Some tool boxes also come with sections that allow you to store nuts, bolts, and other useful objects with relative ease.

If you have a wide variety of tools, you may want to look for a tool box that has a lot of different sections, allowing you to keep particular tools in one area of the tool box, and other tools in a different part. The different sections allow you to find particular tools when you need them the most, meaning they are always to hand no matter what jobs you’re undertaking.

Questions We Are Frequently Asked…

Can you put saws in a toolbox?

Yes, you can put saws in a tool box, but you will need to make sure that you always put a guard over the blade so it is protected. Some smaller saws will fit in a tool box with relative ease, but larger ones will not. If you need to put a saw somewhere safe, then either hang it up on a wall, place it in a large tool box, or store it in a specific place in your workshop or garage.

Some tool boxes come with saws as standard, but they’re not usually very big. If you need to use a large saw, you may want to think about buying a big tool box and make sure you put a guard over the blade. If you have purchased a tool box that comes with tools, but you have an extra saw, it should not be stored in the tool box. This is because tool boxes such as these often have specific compartments for specific tools. This means that there will be nowhere for you to put your saw, so you may need to buy a separate tool box instead, and store your saw in there.

How much weight can they carry?

Ultimately this depends on the type of tool box that you buy. If you buy a tool box that comes complete with tools then it will be more than capable of carrying the tools that come with it. If you purchase a tool box that does not come with tools then you will need to take a look at the packaging or product description to see how much weight they can carry.

If you need to purchase a tool box that can store a lot of heavy tools, you may want to opt for the sturdy looking tool boxes that come with a carry handle and/or wheels. Tool boxes such as these are ideal for storing heavy tools in.

How much should I spend?

Ultimately the amount of money that you end up spending will depend on a few factors: Your budget and whether you need a tool box that comes with tools. Let’s take a look at each of these factors individually:

- Your budget

If you would like to spend as little as possible, then you may want to look for a tool box that is relatively low in price. One of the issues with many low price tool boxes is that they aren’t always very sturdy, meaning they may not be ideal for carrying a lot of tools. Cheaper tool boxes may not be very big either, which means you may not get all of your tools in them. If you don’t have a lot of tools to begin with, then this should not be an issue, but if you do have a lot of tools, you may want to think about paying a little more for your new tool box.

The good news is that some middle of the range tool boxes are usually quite strong and sturdy, making them a good buy, so that extra $10-20 may be worth it.

- Whether you need a tool box that comes with tools

If you are looking for a tool box that comes with tools you will need to be prepared to pay a little bit more. The good news is that if you do fork out for a tool box that comes complete with tools, you may find that you have everything you need. Some of the cheaper tool boxes may not have a wide range of tools that come in different sizes, but they should have the basic tools that will make doing a spot of DIY so much easier. However, if you are looking for a tool box that has a lot of different sized tools and is ideal for use in a workshop, you will need to pay a bit more money.

In Conclusion…​

If you are on the lookout for a tool box that will help you keep your tools safe, or indeed one that already comes with tools, take a look at the list above. Find your ideal tool box so you can get a wide range of jobs completed, assured that you know where all of your tools are when you need them the most.

If you have any other questions or worries please contact us, or if you have any comments or improvements please leave a comment at the bottom of the page.

If you need to use a saw so you can cut a wide range of woods, you need to make sure that you have the right saw blade. It’s likely that the saw blade in question will need to be tough enough to cut through all types of wood, and strong enough to keep going for hours on end. Here is where we can come in and help; we have put together a list of the 5 best table saw blades, so that you are just that little bit closer to using the right blade for you. Take a look at the list below to see what’s available:

Product Reviews

Buying Guide

Type of blade

The type of blade you need will ultimately depend on the type of materials that you’ll be cutting. The blade that you ultimately buy will determine how deep the cut goes. You will need to take a look at your user manual for more information about the type of blade that you need to use. Chances are that your table saw would have come with a blade as standard, but if it hasn’t or it simply needs replacing, please make sure you only use the recommended type and size of blades.

If you use a blade that is the wrong size, or the wrong type, you could damage the blade, your table saw, and the quality of the cuts that you make may not be as good as you would have hoped.

Always use the type and size of blade that is recommended by the manufacturer, as the wrong blade could result in serious injury.

Slide action

Some table saw blades come with a slide action that allows you to cut very wide pieces of wood. If you need to use a slide action saw, you’ll need to make sure that the blade is suitable for this. If the blade you’re using is not suitable for use in a slide action saw, you will need to purchase an additional blade that is. The size of the correct blade and its specifications will tell you whether it is suitable for use in this type of saw. If you aim to cut very wide pieces of wood, you’ll need to use a big blade that has a large width that can be used in a sliding saw. Please take a look at the saw’s packaging for more information about the width of the blade.

Materials you want to cut

While different types of blade cut different materials, you may be interested to know that a table saw blade is capable of cutting hard and soft woods, including cherry wood. Table saw blades can also be used for cutting a wide range of other materials too such as sheet aluminum, sheet plastic, and sheet brass. This means that the blade you use will be more versatile than you may have realized, giving you the opportunity to use it for many different projects, meaning you could get a lot more done using just one table saw blade.

Question

How long will it last?

The life of each table saw blade will differ depending on what material you’re cutting, and how well the blade has been made. You can potentially extend the life of your blade if you keep it clean, and only use it with the right materials. Although table saw blades have predominantly been manufactured for use with wood, they can be used with other materials, however, very frequent use with other materials may cause the blade to go blunt a lot quicker than it otherwise would.

You may need to have your blade resharpened from time to time, and doing so could extend its life, which means you could have the same blade for up to 10 years.

Some blades are inevitably better quality than others, meaning some will last a year or two, and others could last 10 times as long. It all depends on how much money you’re willing to spend, and how often you use your saw. Please note that the better quality blades are usually a little more expensive than those of a lesser quality.

How do you attach your blade?

Attaching a blade to a table saw is not that difficult, but the methods you use can depend on the saw’s make and model. However, once you’ve changed one saw blade, you’ll know how to change blades on most other models out there.

To begin with, you need to ensure the saw is turned off. Then remove the blade guard, once you’ve done that stand in the same position that you would usually stand when you’re operating the table saw. Now use a wrench on an arbor nut and another one on the blade locking pin. Pull the wrench to that the nut is loosened. Now insert the blade, making sure it is perfectly straight, and tighten the arbor nut.

It is important that you read your users manual to make sure that you know how to replace the blade. Some makes and models differ in their replacement guide, so please follow the instructions, taking care to follow each step, making sure all nuts and bolts are tightened, and the guard is in place.

Should you buy cheap but often or expensive and long term?

Some table saw blades can be quite expensive and their price could prevent you from buying them, simply because they may seem too pricey. Some cheaper table saw blades are thought to be just as good as some of the more expensive ones, but some simply not as good. If you plan to be using your table saw a lot, you may want to think about buying a more expensive blade, as you could have the same one for many years.

If you’re not going to be using our table saw very often,  a cheaper blade may be ideal. Please make sure that you only ever use a blade that is thought to be compatible with your saw, as using the wrong type of blade could cause serious injury.

As we have already seen, some blades are inevitably better quality than others, meaning some will last a year or two, and others could last 10 times as long. It all depends on how much money you’re willing to spend, and how often you use your saw.

Should you buy the same brand as your Table Saw?

The manufacturers of your table saw are likely to state that you should only use the saw blades that they recommend. However, some cheaper saw blades could be compatible with your brand, although the quality of the cut may not be quite as good. If you need to use a blade that has a high quality cut, you may want to stick with using the same brand as your table saw. If you don’t need a high quality cut, a cheaper brand could work just as well. Please note that if an issue with your table saw arises while you're using a cheaper blade, your warranty may no longer be valid. It may, therefore, be wise to keep using the right branded table saws until your warranty expires.

Conclusion

By now you should have a much better idea about the type of table saw blade you need to buy. Think about what you need it for, how often you’re going to use it, and how much you are willing to pay for it. Use the above table saw blades as a guide so you’re that little bit closer to finding the right table saw blade.

If you have any other questions or worries please contact us, or if you have any comments or improvements please leave a comment at the bottom of the page.

Buying Guide

Power

The amount of power that a wired router offers can affect its RPM. If you’re in the market for a router that you’ll use occasionally you might want to opt for one that is quite low powered, as it’s unlikely you’ll need that extra boost of power for tough jobs. However, if you do what to use your new router every week, you should opt for one that has more power, so you can tackle those tougher jobs with ease. If you’re not sure how much power you will need, take a look at the router’s packaging or product description and it will tell you exactly what can be used for.

RPM

Most routers will let you adjust the RPM a little, although some compact routers do not allow you to adjust it quite as much as the larger size models do. In any case, the RPM that you’ll need will depend on the job that you need to do. The type of wood that you’re going to use could also affect the speed. If you’re using hard wood, you may need to use a quicker speed. Typically, the larger the router bit, the slower the speed will need to be. If you have never used a wired router before, you will need to practice using different size router bits at different speeds. Practising will help you to gauge how fast you need the router bit to spin in order to get the job done properly.

Model

The wired router model you end up purchasing will depend on a few things:

• How much money you want to spend on a router
• How often you are going to use your new router
• Which brand you prefer.

Cost

When it comes to the cost, you should think about spending no more than $150 on your new wired router. This is because you need to gauge how well you can use one, and how well you can handle its power. You should be aware that a cheaper model will not be the best model out there, but it should be reasonably ok. Take a look at any comments and reviews that have been left by buyers, and spend as much or as little as you please.

Frequency of use

If you’re going to be using your new router every day, you may want to think about spending quite a bit of money on it. This is because some of the more expensive models have been made for frequent use. Some of the cheaper models have been made for occasional use, and they may even begin to over-heat if you use them for long periods of time.     

Which brand you prefer

Some people prefer one brand to another, and the availability of a wired router that goes by their favorite brand name may ultimately determine which wired router they buy.

If you don’t have a favorite brand, simply choose the wired router with a good reputation, a good price, and one that you think will work well for you.

Weight

Wired routers can differ in weight, simply because the motor in some routers is larger than those found in other routers. When you’re using a wired router, don’t forget that you have to support it every step of the way: From the moment you turn the motor on, to the moment you switch it off. Therefore a lighter model may be ideal if you don’t want to pick up and guide anything too heavy.

My advice is to visit a hardware store and pick up the first wired router you come across. Imagine that you’re working with it: How does it feel? Is it too heavy to pick up, or is it comfortable? You may be interested to know that routers with middle-of-the-range prices are usually some of the easiest routers to control, so you may wish to opt for these.

Questions

Why should I buy a corded router?

Some routers come with batteries, and some come with cords. Battery-operated routers may seem quite easy to use, but you need to make sure that the battery is always charged whenever you need to use it. When you use a corded router, you will not need to worry about the power source in the same respect. As long as you have somewhere to plug the router in, you should be good to go.

If your work area has no power outlet, you may need to think about adding one, or purchasing an extension lead so you can plug it into a power outlet in one room, running it through to your work area. 

Should you get the same brand router bits?

Most wired routers will come with a few router bits, however, some routers may not come with any at all. You will no doubt appreciate that some bits can be quite costly, and this may tempt you to purchase bits that are not made by the same manufacturer. While many people are happy to buy compatible bits, the manufacturer of your new wired router does not recommend this. This is because they cannot be completely certain that those bits will sit nicely in place. A loose bit could fail to work as well as it should, and there is even the chance that it could cause an accident.

If you purchase router bits that have been made by the same manufacturer, you will know that they fit perfectly, and they may even be slightly better quality. The choice is ultimately up to you. Please make sure that whatever bit you buy, you fit it properly and it is securely fixed in place.

Conclusion

There are many different wired routers on the market right now, and most of them are worth purchasing. We think that the 5 wired routers that you can find above are the best out there. Now it’s up to you to choose the right wired router for you, so you can get all of your jobs done with ease.

If you have any other questions or worries please contact us, or if you have any comments or improvements please leave a comment at the bottom of the page.

Buying Guide

Power

When it comes to buying the right plasma cutter for you, you need to make sure that you know roughly how long you will use the tool at any one time. If you plan to use your new plasma cutter quite often, but not for very long, ideally you should look for a model that has a good maximum cutting ability as you’re likely to get some good results.

If you wish to use a plasma cutter every few weeks or so, you should ideally look for a cutter that matches the thickness of the materials you may be cutting. The higher the amperage output, the better it will be.

If you are not yet sure how often you will be using your new plasma cutter, you may wish to purchase one that offers a middle of the range cutting ability, as chances are you’ll find that it’s good enough. However, if you’re unsure as to what cutting ability you need, think about the thickness of the material you’re going to cut. Take a look below for more information.

Cutting Range

One plasma cutters cutting range will vary from another model’s range, meaning if you’re looking to cut materials of a specific thickness, you will need to shop around. The good news is that when you’re looking for a cutter that cuts at a specific thickness, the manufacturer tends to make the search easy by detailing the maximum thickness on the packaging. Therefore, you should take a look at the maximum thickness, and determine which model is ideal for you. Measure up the materials you are going to use, and write those measurements down. Think about how deep you’re going to cut those materials, and again, write those measurements down. Take these measurements with you when you’re shopping for a plasma cutter online, or in-store.

Some sellers of plasma cutters will allow you to practice on some cutters so you can get to grips with how well they perform, and if they cut deep or long enough for you. Alternatively, you may wish to ask a local garage or workshop what type of plasma cutter they use, and what range it offers.

Getting the right range for the materials you’re going to use is of utmost importance as the wrong range can hinder the work that you do.

Price

As we have already seen, plasma cutters do vary in price. For example, the plasma cutters that you can find above range from $241 to $778. How much you end up paying for your new plasma cutter will depend on how often you wish to use it, how much you want to spend, and what materials you’re going to be cutting.

If you won’t be using your new plasma cutter very often, there may be no point in you spending very much money on one. Alternatively, if you plan to use your new cutter every few days, then it could be worth your while investing a little bit more money.

Your budget could ultimately dictate how much you would like to spend on your plasma cutter. If for example, you have a budget of $300, you may not end up with one of the more robust models, but you could still get a model that is reliable and gives a smooth cut. If you would like to spend as much money as possible on a plasma cutter, it would be wise to opt for one that has a good reputation and can cut at the depths and lengths you need it to cut at.

The materials that you’re going to be cutting, or rather the thickness of those materials could have an impact on the model you end up buying. On some occasions the more expensive models may cut a little thicker, meaning you might have to pay just that little bit more to get the required depth.

Questions

Are they worth it for the price?

Some plasma cutters are quite expensive, but the more expensive models tend to be used in workshops, and in the fabrication process. In this respect, plasma cutters are worth it for the price, as the more expensive models have been built for frequent use.

Some cheaper models are unable to be used quite as often as the more expensive ones as they may overheat, however, if you do not wish to use a plasma cutter all day every day, then a cheaper model may be ideal. However, a cheaper model may not offer a cut that’s quite as smooth or a depth that you may prefer.

What can they cut?

Plasma cutters can typically cut any conductive material. This means that materials that can conduct electricity and heat are ideal for use with a plasma cutter. More specifically plasma cutters can cut through aluminum, brass, stainless steel, copper, and steel, making them ideal for use in workshops, scrapping operations, construction, and salvage too.

Working to create an electrical channel of heated ionized gas (Otherwise known as ‘Plasma’), that moves through the plasma cutter into the conductive material, an electrical circuit is formed as the cutter is attached to a grounding clamp that completes the circuit, and sends the electricity back through to plasma cutter.

Do they have to have a particular environment to work?

If you plan to use a plasma cutter to allow you to undertake a variety of jobs, you will need to make sure that you have enough outlets and an outlet that is powerful enough to power the plasma cutter. Due to the way that this tool works, you will need to use it in an environment (Such as a workshop or a large garage) that has a lot of space. What’s more is if you are cutting or boring holes into large pieces of metal, you will need to make sure there is plenty of room for you to get to work.

You may also need access to compressed air, but no matter how your new plasma cutter is powered, you will need to make sure there is enough room for you to work in as you will need to maintain a distance of 3/16 inch to 1/8 inch away from the nozzle.

Conclusion

There are many different plasma cutters on the market right now, but we hope you can find the best plasma cutter for you in the list above. Take a look at each of the cutters, and choose the one that you think will be ideal in your garage, workshop, or wherever you wish to use it.

If you have any other questions or worries please contact us, or if you have any comments or improvements please leave a comment at the bottom of the page.

So, What are the products on offer?

Craftsman 9-41796

Weighing 1.4 ounces, and measuring 2 x 5.3 x 11.8 inches, the 9-41796 comes with 14 bits in an assortment of sizes, helping you to get more jobs done. With an easy-grip handle, and a reputation for being strong and sturdy, this could be the ratcheting screwdriver you need. However, the handle is quite large making it difficult for those who have small hands. If you have small hands, you may want to think about buying an alternative ratcheting screwdriver instead.

At Number Two...

Stanley 66-358

Complete with 6 chrome vanadium bits, this screwdriver also has internal storage so you have easy access to those bits whenever you need them. Measuring 7.5 x 4 x 1.5 inches, and weighing 0.3 ounces, this could be one of the lightest screwdrivers around. Ideal for use in tight spaces, the 66-358 comes with 3 Philips bits, ¼ inch slotted bit, 1/8-inch slotted bit, and a 3/16- slotted bit. With a 3-position switch that allows users to turn the screwdriver clockwise, counter-clockwise, and in a locked position, this screwdriver has a reputation for being a good all-round tool.

At Number Three...

Kobalt QL3

Weighing 1.4 pounds, and measuring 10 x 6.2 x 2 inches, this is the biggest and heaviest ratcheting screwdriver we have seen so far, but it does come with a hex drive, Philips drive, Pozidriv drive, a square drive, and a Torx drive. With a reputation for being very easy to use, and allowing users to get a lot of jobs done quickly, the Kobalt Double Drive Screwdriver set is one of the best tools out there.

At Number Four...

Stanley 62-574

The Stanley 62-574 MultiBit Ratcheting Screwdriver Set comes with a black and yellow finish, and storage in the handle for the bits that come with the screwdriver as standard. Plated so that it is resistant to corrosion, this set is sold for approximately $17, and has a magnetic bit holder that makes changing bits easy and secure.

At Number Five...

Stanley 69-189

Sold for approximately $11.30, and measuring 11.8 x 3.6 x 1.3 inches, and weighing 4.8 ounces, the Stanley Screwdriver has a bi-material handle that has been textured for torque and grip, making it easier to use. Complete with 6 bits, and with a reputation for being a good quality ratcheting screwdriver, the Stanley 69-189 could be the tool you need.

Buying Guide…

Storage

When it comes to storing all of those different bits, you should ideally opt for a ratcheting screwdriver that is capable of storing the bits for you. This is because the bits are usually quite small and fiddly, and finding them when they’re in among all your other tools can be quiet tricky. Plus, because they are quite small, bits tend to get lost, meaning you may not be able to get your jobs done if you cannot find the bit that you need.

Here is where a ratcheting screwdriver with a mini storage compartment can help: Allowing you to store your bits inside the screwdriver means that you can have access to them whenever you need them, you just need to make sure that when you’re done with the bits you place them in the storage area ready for use next time.

Not every ratcheting screwdriver comes with storage options, but if this is something that appeals to you, you may want to think about purchasing a screwdriver that has storage for its bits.  When you’re using your new screwdriver and you want to change a bit, please make sure that you always put the bit that you no longer need back in the storage compartment so you know where to find it next time. This option also means that you’re less likely to lose your bits, keeping them safe and secure so you can find them when you need them, making your DIY life so much easier.

Questions We Are Frequently Asked…

In Conclusion…​

If you have any other questions or worries please contact us, or if you have any comments or improvements please leave a comment at the bottom of the page.

If you are about to undertake a variety of tasks that involve cutting wood at a specific depth and in a specific style, you will need a plunge router. A plunge router will help you to create the effects you need, quickly and easily, with a lot less fuss than if you cut the wood by hand. The only trouble is there are so many plunge routers on the market right now that it may be difficult to know which tool is the right one for you. Here is where we come in and make life a little easier. Below you will find 5 of the best plunge routers on the market, meaning you’re closer to finding the right plunge router for you.

Product Reviews

Buying Guide

Power

There are many different plunge routers on the market, and many of them offer more or less power than their competitors. The amount of power that they offer can affect the RPM. If you’re looking for a plunge router to use every now and again, you may want to opt for a router that doesn’t have very much power, however if you’re looking for a router to use very frequently, you’re likely to need quite a bit of power, so that you can get more jobs done.

RPM

Many routers will allow you to adjust the RPM so that you can work as quickly or as slowly as you wish. The speed that you need will depend on the jobs you have to undertake, and the type of wood you’re about to use. If you’re new to the world of plunge routers you may not know what speed you will need, but after a while, you will understand which speeds you need and when.

If you are likely to need a variety of speeds, you may want to opt for a plunge router that can offer you varying speeds. Plunge routers typically offer you speeds between 8,000 RPM and 25,000 RPM, helping you to get a lot of different jobs done using one piece of equipment.

Please note that the size of the bit will determine the maximum speed that it can be used at:

Bits of up to 1 inch can be used at a maximum of 24,000 RPM.

Bits that have a diameter of 1 to 2 inches can be used at a maximum of 18,000 RPM.

Bits that have a diameter of  2 to 2 ½ inches can be used at a maximum of 16,000 RPM.

Bits that have a diameter of 2 ½ to 3 ½ inches can be used at a maximum of 12,000 RPM.

Model

The model that you end up buying will depend on a few factors:

How much you would like to spend:

If you would like to spend as little as possible on your new plunge router, you might have to accept that you won’t get a top quality model. Many plunge    routers are sold for at least $200, but you can buy routers that cost a little less. If you would like to use a top-quality plunge router, you may have to spend more than $250.

How often you are likely to use the plunge router:

If you plan to use your new router once or twice a year you may as well invest      in a cheap model. However, if you plan to use your new plunge router fairly frequently, you should be prepared to pay at least $200 for a reliable model.

Weight

Plunge routers do tend to weight quite a bit, simply because they have a large motor,  different plates, and they need to be supported by the user. If you would like to opt for the lightest plunge router possible, you should think about opting for the mid-range priced models as these tend to be slightly lighter than the cheapest models. If you are going to be using the plunge router quite a lot, you should also look for a plunge router that is comfortable to use and easy to control. Again, mid-range priced models tend to be the most comfortable to use

Questions

Why would I need a plunge router?

Plunge routers tend to be a lot more versatile than many other types of router. Plunge routers are absolutely ideal for use in creating dado cuts, blind grooves, mortising operations, and fluting, to name but a few. A plunge base moves up and down offering users the chance to cut at different depths while you control the horizontal movements.

A plunge router is so good at cutting at different depths that users who need to make very small adjustments to depths often find that a plunge router is the most useful tool around. Other tools may be able to do the same job, but they may not be as easy to control, and they may not have the same quality of finish. Use a plunge router and get a good quality finish while having complete control over the job.

Should you get the same brand router bits?

It’s likely that your new plunge router will come with a variety of bits, but you may need to replace them at some point. Some router bits can be quite expensive, so you may be tempted to purchase similar and compatible router bits that cost less. There is no guarantee that cheaper compatible bits will fit into the router and work just as well, which means you will be taking a bit of a risk buying them.

Using the same brand router bits means that you know those bits are compatible with your new plunge router, and those bits are likely to be slightly better quality that compatible bits, depending on the brand that you buy. Ultimately it is up to you as to the brand of the bits that you buy, please just make sure that the bits fit tightly and securely so that there is little chance of them coming loose when you’re using them.

If the bit that you have purchased does not fit properly, please do not use it as it could cause serious injury if it comes loose.

Conclusion

Plunge routers are perfect for helping you to undertake jobs that involve you cutting into wood to create a patterned edge. We believe that the above 5 plunge routers are the best on the market right now, so all you need to do is choose the right plunge router for you, so you can get your jobs done quickly and efficiently.

If you have any other questions or worries please contact us, or if you have any comments or improvements please leave a comment at the bottom of the page.