- Home → Archive: October, 2017
Best Survival Multitool 2019 Reviews and Comparisons
If you are interested in survival techniques and you want to be prepared in case something bad should happen it’s likely that you’ll also be on the lookout for a survival multi-tool. The trouble with this is there are so many different types of survival multi-tools on the market. Here is where we can come in and help out. Below you will find 5 of the best multi-tools on the market right now, making your search for the perfect tool even easier. Whatever your reason for wanting the best survival multi-tool out there, we think you can find it below, so take a look, and get ready to shop for the perfect tool!
Product Reviews
The Jeep Cretaceous Multi Tool Set comes with a 6.5-centimeter blade and is made from 420 steel. Complete with an adjustable wrench, spring-loaded pliers, a non-locking blade, 2 hexagonal sockets, and 3 screwdriver bits, this is a very handy tool to have about your person. Sold for approximately $14, the Jeep Cretaceous tool is a sturdy looking piece of equipment that when folded measures 12 x 3.6 x 1 centimeter.
Ideal for use when you’re camping, walking in the countryside, or simply mending something at home, this Jeep Multi tool set has a reputation for being well made, and ideal for a number of projects. With a black pendulum button that locks the tool in place when it’s not being used, this multi tool is perhaps a little smaller than you would expect, but it does have a reputation for being ideal when you want to carry out different jobs around the home, or on the trail. However, if you’re looking for a rugged tool set that has many more capabilities, you may need to spend a bit more money.
Pros
- It is made from 420 steel
- It is complete with an adjustable wrench, spring-loaded pliers, a non-locking blade, 2 hexagonal sockets, and 3 screwdriver bits
Cons
- Sold for approximately $14
The Gerber Bear Grylls Ultimate Multi-tool is a very impressive looking tool that comes with a rugged finish, and a range of tools that could help you in an emergency situation. Complete with a nylon sheath that is resistant to mildew, this military-grade tool also comes with land-to-air instructions.
With a rubber grip that has been ergonomically designed to comfort, the textured rubber grip does make it comfortable to hold. Sold for approximately $44, the Gerber Bear Grylls Ultimate Multi-tool weighs just 8.6 ounces, and it comes with 12 weather-resistant stainless steel tools. With needle nose pliers, a serrated and fine-edge knife, can opener, wire cutters, scissors lanyard ring, and a bottle opener along with a screwdriver and a medium and flat driver, this tool really does seem to have it all.
Measuring 4 inches when it’s closed, and 6 3/10 inches when it’s open, this multi-tool has a reputation for being a reliable addition to your camping or survival gear. If you’re looking for a good multi-tool to use in different locations and for different reasons, this could be the one to opt for.
Pros
- It has 12 weather-resistant stainless steel tools
- It is complete with a nylon sheath that is resistant to mildew, this military-grade tool
Cons
- It doesn't come cheep
The Gerber Suspension Multi-Plier is a tough-looking piece of equipment that weighs 9.6 ounces and is sold for approximately $35. With a ballistic nylon sheath, and a Saf.T.Plus locking system, users should find that the tool is safe to carry once the components have been locked in place. Simply place the Gerber in your pocket or rucksack, and forget about it until you need to use it again.
Complete with needle-nose pliers, a saw, wire cutter and stripper, screwdrivers, scissors, can opener, bottle opener, serrated and straight blade, awl, and a Phillips screwdriver, this could be the only multi-tool you need. With TI-coated butterfly opening handles, an open frame design and an open length of 6.5 inches, the multi-plier also comes with a closed length of 4 inches. Weighing 9 ounces, and with a reputation for being a good quality tool with an excellent design, the Gerber Suspension Multi-Plier tool isn’t the smallest tool out there, but it is quite tough.
Pros
- It comes with a ballistic nylon sheath, and a Saf.T.Plus locking system
- It is complete with needle-nose pliers, a saw, wire cutter and stripper, screwdrivers, scissors, can opener, bottle opener, serrated and straight blade, awl, and a Phillips screwdriver
Cons
- It is expencive
The Thomas Weyker 14-in-1 Multitool Pliers is sold for approximately $25, and it comes in 4 different colors. Ideal for use just about anywhere, users will find this tool useful when they’re out fishing, doing work in the garden, out camping, or working around the home.
Complete with wire cutters, a wood saw, reinforced spring-action pliers, a can opener, metal file, larger and medium slotted screwdrivers, a straight edge knife, fish hook remover, bottle opener, leather punch, Phillips screwdriver, and a safety locking mechanism, this could be the tool you need. Measuring 5.2 x 3 x 1.9 inches, and weighing 11.2 ounces the Thomas Weyker 14-in-1 Multitool isn’t the lightest tool on the market, but it does come with a lot of different tools, and a reputation for being well built and easy to use.
Pros
- It is a 14-in-1
- It is complete with safety locking mechanism
Cons
- It is quite a heavy too due to its multiple components
The Leatherman Wave Multitool with Nylon Sheath is sold for approximately $90 and comes with 17 tools. Complete with needlenose & regular pliers, wire cutters & a wire stripper, 2 knives, a saw, scissors, ruler, can opener & bottle opener, files, large and small bit drivers, and a screwdriver, this could be the ultimate survival multitool.
Weighing 14.4 ounces, and measuring 6 x 4 x 2 inches, the Leatherman Wave allows some tools to be accessed when the tool is closed or folded. Made so that every feature can be opened using one hand, and with an excellent reputation for being one of the best survival tools on the market, the Leatherman Wave is definitely worth considering.
Pros
- It is complete with needlenose & regular pliers, wire cutters & a wire stripper, 2 knives, a saw, scissors, ruler, can opener & bottle opener, files, large and small bit drivers, and a screwdriverPM
- Has an excellent reputation for being a very good tool
Cons
- It is the the most expensive out our sujestions
Buying Guide
Uses
When you’re looking to buy a multitool, you may want to consider what you will be using it for. If you are planning to go out into the wild, relying on as little as possible to get by, you may want to opt for a multitool that has a lot of different parts. If you’re looking for a tool to have in your pocket or bag every day, you may not need a multitool that has a lot of different components, you may simply need one that comes with a screwdriver or two, some pliers, and a small blade.
Multitools in general, can be used when going camping, hiking, on vacation, for use in and around the home, fixing bikes, fishing, and for use on survival weekends.
Different Parts
Most multitools come with screwdrivers, a saw, and a few other parts, but some such as the Leatherman Wave come with up to 17 different parts/components. If you think you might need a lot of different parts, you may want to opt for a tool that has a wide range, however, if you think you may only need to use the tool occasionally, you may not have a need for 17 different parts. However, if you tend to use many tools every day, and you think that you could get by with a multitool that has everything you need,.there is likely to be a tool out there that has something for you. Work out what it is you use every day, and find a tool that has a screwdriver or two, for example, in addition to some pliers, a blade, a can opener and an awl.
Price
As you can see from the range of multitools above, prices can vary from less than $15, to $90. The price that you end up paying for your multitool could depend on a few factors:
How much you’re willing to pay:
If you want to pay as little as possible, you may end up with a tool that does not have a lot of different components. It is likely to have the basic components, such as a blade, a screwdriver, and some scissors, but if you want more tools, you should be prepared to pay more.
What you need the multitool for:
If you need a multitool to fix a lot of things, or to simply offer you reassurance when you’re out in the wild, you might want to pay a little more. You should look for a tough tool that offers you a lot of different components while being safe to use and store in your pocket. If you only need a multitool to help you cut a bit of wire now and again, and to screw in some bolts, you may not need to spend very much money on one at all.
Conclusion
Multitools can ultimately be a lifesaver if you find yourself in an emergency situation, however, they can also be ideal for use around the home, when you’re camping, or when you’re on the trail. No matter why you need a multitool, or what you want to use it for, we are confident that you will find the multitool you need above. Take a look at the 5 tools that we believe are the best on the market right now, and get that little bit closer to finding the multitool you need to get a range of jobs done.
If you have any other questions or worries please contact us, or if you have any comments or improvements please leave a comment at the bottom of the page.
Best Router Table 2019 Reviews and Comparisons
If you need to get a lot of work done, you might need to buy a router table. This type of table may fit different table saws while allowing you to work with relative ease. The issue is that there are so many different router tables out on the market right now that it can be hard to know which is the right one for you. Here is where we can come in and help. Below you will find 5 of the best router tables out there, making it so much easier to find the right router table for you.
Product Reviews
The Bench Dog Tools 40-102 ProMax Cast Iron Router Table Extension is capable of fitting every contractor-grade table saw, and other table saws that are right-tilt and cabinet-grade. This means that the Bench Dog gives users a lot more flexibility so that they can get a wide variety of work done.
Sold for approximately $330, this router table extension comes with a router top, mounting hardware, and fence. Measuring 18 x 29 x 4 inches, and weighing 60 pounds, the industrial-grade table router is considered ideal for workshops where there isn’t much space. With a dual fence slot configuration, and a miter slot, and offering users a ¼ inch T-slot, the Bench Dog has a reputation for being well-made, without taking up too much space.
Pros
- Industrial grade
- It fits all contractor-grade table saws
Cons
- Doesn’t always fit very well
The Bosch RA1181 Benchtop Router Table comes with a dust collection port, 6-foot power cord, adjustable featherboards, and a dual outlet switch. Sold for approximately $359. the BOSCH RA1181 also has a 27 x 18-inch work surface and is compatible with many routers. Weighing 33.5 pounds, and measuring 27 x 18 x 14.5 inches, a guard and starter pin are also included in the pack. With a rigid mounting plate and an aluminum fence, users can deal with tall stock without many difficulties. With up to 3 ½ bit capacity, MDF face plates, and a reputation for being a reliable router table, the BOSCH RA1181 may be worth considering.
Pros
- It fits many routers
- Has a good reputation
Cons
- Carriage bolts often strip out
The Kreg PRS1045 Precision Router Table System is a tough-looking product that comes with a high-performance table top and a customizable stand. Sold for approximately $500, this isn’t the cheapest router table system out there, but it does have a lot to offer. Easy to set up and durable, the Kreg PRS1045 comes with a unique T-square fence and a clean and modern finish.
Weighing 70 pounds, and measuring 40 x 30 x 7 inches this table system is not ideal for small areas, but if you have a lot of work to do, it could be the router table system you need. With a reputation for being outstanding, and with a solid design, if you are willing to pay a little more for your router table system, this could be the model for you.
Pros
- It has a excellent reputation
- Has a customizable stand
Cons
- Very high in price
The SKIL RAS900 Router Table is sold for approximately $278, making it one of the cheapest on the market right now. With containers that allow users to store their accessories and a bit height gauge to help users simplify their set up, the SKIL RAS900 could be worth considering. Weighing 32 pounds, and measuring 27.7 x 17.7 x 9.5 inches, this isn’t the largest router table around, but it still has a lot to offer.
With a miter gauge, featherboard, bit inserts, and a guard, this router table also comes with a quick release router mount, and a starter pin and guard, giving the user additional support when using curved equipment. The SKIL router table comes with a reputation for being a good router table if you’re only going to be using it now and again.
Pros
- It is relatively low price
- Comes with extra storage
Cons
- Not ideal for everyday use
The Craftsman B00WZPHNIU Router Table is sold for approximately $84 and has a pleasant red/silver finish. Complete with 3 insert rings, a dust extraction port, and height adjustment, the Craftsman could be ideal if you don’t want to spend a lot of money on a router table.
Securely holding the router in place, this table ensures users have a very smooth work area, and the outfeed and infeed offer up two inches more than some other models. With a miter gauge that can be adjusted in 2 directions of up to 60 degrees and a reputation for being sturdy, this could be the ideal router table if you don’t intend to use one every day.
Pros
- It is very low in price
- Offers a smooth work area
Cons
- The fences tend to move easily
Buying Guide
Size
The size of the router table that you end up buying could depend on a few factors:
How much room you have to spare?
Some tables are ideal for small locations, the Bench Dog Tools 40-102 ProMax Cast Iron Router Table Extension, for example, can be added onto a table in a workshop. This means that if you do not have a lot of room, this extension could come in very handy. However, if you do have a lot of room, you may wish to opt for a larger table that has more space.
How much you wish to pay for your table?
If you would like to pay as little as possible for your router table, again you may want to opt for the Bench Dog extension or the SKIL RAS900 Router Table that comes with additional storage. If on the other hand, you are looking for a large router table, you should be prepared to pay more for it, as it will need to be a sturdy piece of equipment that supports your saw, and other accessories.
Router Mounting Plate
Phenolic or cast-iron router plates are thought to be very durable and safe. When you’re on the look-out for a new router table, you may want to look for tables that have been made from these materials. Not only are these materials strong, but they also help to reduce vibrations which means all of your cuts are more exact.
If you purchase a router table that has a small plate, it will not be as compatible as some of the larger ones. The larger plates fit most router tools, so you may want to opt for a good sized plate so you and other people can use the router table with ease.
If you are determined to buy a router table with a small plate, please find out which routers it is compatible with, as you may be disappointed. If you have already purchased a router, make sure that any table you consider is compatible with your brand to avoid disappointment.
Mobility
Some router tables can easily be moved from place to place, but some are not as portable as you may like. If you are looking for a router table that is portable, you may want to opt for a benchtop table, as they can sit just about anywhere that has a flat surface. Weighing approximately 40 pounds, benchtop tables are not light, but they can often be moved with relative ease.
Some router tables allow you to adjust the table from a benchtop table to a free-standing one. If this is the type of table that you would like, please make sure you look for a brand that offers you this. If you come across a table that can be adjusted in this way, it will have legs that fold, while being light enough for you to move from place to place.
Questions
Why would you use a router table?
Many people like to use a router table because it allows them to create smooth edges while working to a specific size and shape. Router tables also allow users to work with tall or curved stock. Routers can do quite a good job themselves, but if you would like your work to be a lot more accurate, here is where a router table could come in and help. If you’re constructing a new door frame, or you simply want to have a good finish, a router table can help you guide your lengths of wood a lot more easily.
Router tables are also ideal when you are lacking in space, particularly as some can be added as an extension to the table you usually work on. This means you technically have a lot more room, and you can do different types of work without needing to pay for a whole new table, or taking up even more space.
Router tables can also be very quick to use, allowing you to move from one area of the workshop to your router table, where you can cut that piece of wood, giving you a smooth finish, before you move onto the next stage of construction.
Can a router table be used as a jointer?
A router table can be used as a jointer because if you need a narrow jointer for edging, a router table is thought to be ideal. You can use a table mounted router if you wish to straighten some edges that have been narrowed, however, it can take a while to set up the fence with the ideal offset. Once you have the right offset, you’re good to go.
If you need a narrow jointer, simply ensure that your infeed and outfeed guides are tough enough, and long enough too, so that they can cope with the jobs you need doing.
What other things can you use a router table for?
If you wish, you may want to use your new router table as a saw, all you would need to do is set the router to a very deep threshold, preferably one that is a lot deeper than you would ordinarily use. Once you have the threshold set, you’re good to go. You may also want to think about turning the piece of over and routing the underside, as this has been proven to work.
Dovetails can be cut using a router table, in fact using a router table to cut this type of joint is fast and very effective. Clamp the tail board into a template, and then use a straight bit to cut all of the pins. This can be a little tricky to do, but a router table usually makes cutting dovetails so much easier than if you were to cut them by hand. Ideally you should make a few test-cuts just to see how effective your dovetails will be, then you’ll be good to go.
Another use for a router table includes cutting straight bits of wood, whether they are long or short. Giving a smooth finish, perhaps a smoother finish than if you were to cut the wood by hand, if you have a big job to get on with, here is where a router table will come into its own. Just make sure you have enough room on either side of the table so that you can cut large or small pieces of wood, and wood that has a curve to it.
Conclusion
If you are looking for a new router table for your workshop or garage, you should find the perfect table in the list above. Take a look at each of the tables and don’t forget to review their pros and cons so you have a good idea as to how they perform, so you get one step closer to finding the right router table for you.
If you have any other questions or worries please contact us, or if you have any comments or improvements please leave a comment at the bottom of the page.