Best Router Table 2017 Reviews and Comparisons

If you need to get a lot of work done, you might need to buy a router table. This type of table may fit different table saws while allowing you to work with relative ease. The issue is that there are so many different router tables out on the market right now that it can be hard to know which is the right one for you. Here is where we can come in and help. Below you will find 5 of the best router tables out there, making it so much easier to find the right router table for you.

Product Reviews

The Bench Dog Tools 40-102 ProMax Cast Iron Router Table Extension is capable of fitting every contractor-grade table saw, and other table saws that are right-tilt and cabinet-grade. This means that the Bench Dog gives users a lot more flexibility so that they can get a wide variety of work done.

Sold for approximately $330, this router table extension comes with a router top, mounting hardware, and fence. Measuring 18 x 29 x 4 inches, and weighing 60 pounds, the industrial-grade table router is considered ideal for workshops where there isn’t much space. With a dual fence slot configuration, and a miter slot, and offering users a ¼ inch T-slot, the Bench Dog has a reputation for being well-made, without taking up too much space.

Pros

  • Industrial grade
  • It fits all contractor-grade table saws
Cons

  • Doesn’t always fit very well

The Bosch RA1181 Benchtop Router Table comes with a dust collection port, 6-foot power cord, adjustable featherboards, and a dual outlet switch. Sold for approximately $359. the BOSCH RA1181 also has a 27 x 18-inch work surface and is compatible with many routers. Weighing 33.5 pounds, and measuring 27 x 18 x 14.5 inches, a guard and starter pin are also included in the pack. With a rigid mounting plate and an aluminum fence, users can deal with tall stock without many difficulties. With up to 3 ½ bit capacity, MDF face plates, and a reputation for being a reliable router table, the BOSCH RA1181 may be worth considering.

Pros

  • It fits many routers
  • Has a good reputation
Cons

  • Carriage bolts often strip out

The Kreg PRS1045 Precision Router Table System is a tough-looking product that comes with a high-performance table top and a customizable stand.  Sold for approximately $500, this isn’t the cheapest router table system out there, but it does have a lot to offer. Easy to set up and durable, the Kreg PRS1045 comes with a unique T-square fence and a clean and modern finish.

Weighing 70 pounds, and measuring 40 x 30 x 7 inches this table system is not ideal for small areas, but if you have a lot of work to do, it could be the router table system you need. With a reputation for being outstanding, and with a solid design, if you are willing to pay a little more for your router table system, this could be the model for you.

Pros

  • It has a excellent reputation
  • Has a customizable stand
Cons

  • Very high in price

The SKIL RAS900 Router Table is sold for approximately $278, making it one of the cheapest on the market right now. With containers that allow users to store their accessories and a bit height gauge to help users simplify their set up, the SKIL RAS900 could be worth considering. Weighing 32 pounds, and measuring 27.7 x 17.7 x 9.5 inches, this isn’t the largest router table around, but it still has a lot to offer.

With a miter gauge, featherboard, bit inserts, and a guard, this router table also comes with a quick release router mount, and a starter pin and guard, giving the user additional support when using curved equipment.  The SKIL router table comes with a reputation for being a good router table if you’re only going to be using it now and again.

Pros

  • It is relatively low price
  • Comes with extra storage
Cons

  • Not ideal for everyday use

The Craftsman B00WZPHNIU Router Table is sold for approximately $84 and has a pleasant red/silver finish. Complete with 3 insert rings, a dust extraction port, and height adjustment, the Craftsman could be ideal if you don’t want to spend a lot of money on a router table.

Securely holding the router in place, this table ensures users have a very smooth work area, and the outfeed and infeed offer up two inches more than some other models. With a miter gauge that can be adjusted in 2 directions of up to 60 degrees and a reputation for being sturdy, this could be the ideal router table if you don’t intend to use one every day.

Pros

  • It is very low in price
  • Offers a smooth work area
Cons

  • The fences tend to move easily

Buying Guide

Size

The size of the router table that you end up buying could depend on a few factors:

How much room you have to spare?

Some tables are ideal for small locations, the Bench Dog Tools 40-102 ProMax Cast Iron Router Table Extension, for example, can be added onto a table in a workshop. This means that if you do not have a lot of room, this extension could come in very handy. However, if you do have a lot of room, you may wish to opt for a larger table that has more space.

How much you wish to pay for your table?

If you would like to pay as little as possible for your router table, again you may want to opt for the Bench Dog extension or the SKIL RAS900 Router Table that comes with additional storage. If on the other hand, you are looking for a large router table, you should be prepared to pay more for it, as it will need to be a sturdy piece of equipment that supports your saw, and other accessories.

Router Mounting Plate

Phenolic or cast-iron router plates are thought to be very durable and safe. When you’re on the look-out for a new router table, you may want to look for tables that have been made from these materials. Not only are these materials strong, but they also help to reduce vibrations which means all of your cuts are more exact.

If you purchase a router table that has a small plate, it will not be as compatible as some of the larger ones. The larger plates fit most router tools, so you may want to opt for a good sized plate so you and other people can use the router table with ease.

If you are determined to buy a router table with a small plate, please find out which routers it is compatible with, as you may be disappointed. If you have already purchased a router, make sure that any table you consider is compatible with your brand to avoid disappointment.

Mobility

Some router tables can easily be moved from place to place, but some are not as portable as you may like. If you are looking for a router table that is portable, you may want to opt for a benchtop table, as they can sit just about anywhere that has a flat surface. Weighing approximately 40 pounds, benchtop tables are not light, but they can often be moved with relative ease.

Some router tables allow you to adjust the table from a benchtop table to a free-standing one. If this is the type of table that you would like, please make sure you look for a brand that offers you this. If you come across a table that can be adjusted in this way, it will have legs that fold, while being light enough for you to move from place to place.

Questions

Why would you use a router table?

Many people like to use a router table because it allows them to create smooth edges while working to a specific size and shape. Router tables also allow users to work with tall or curved stock. Routers can do quite a good job themselves, but if you would like your work to be a lot more accurate, here is where a router table could come in and help. If you’re constructing a new door frame, or you simply want to have a good finish, a router table can help you guide your lengths of wood a lot more easily.

Router tables are also ideal when you are lacking in space, particularly as some can be added as an extension to the table you usually work on. This means you technically have a lot more room, and you can do different types of work without needing to pay for a whole new table, or taking up even more space.

Router tables can also be very quick to use, allowing you to move from one area of the workshop to your router table, where you can cut that piece of wood, giving you a smooth finish, before you move onto the next stage of construction.

Can a router table be used as a jointer?

A router table can be used as a jointer because if you need a narrow jointer for edging, a router table is thought to be ideal. You can use a table mounted router if you wish to straighten some edges that have been narrowed, however, it can take a while to set up the fence with the ideal offset. Once you have the right offset, you’re good to go.

If you need a narrow jointer, simply ensure that your infeed and outfeed guides are tough enough, and long enough too, so that they can cope with the jobs you need doing.

What other things can you use a router table for?

If you wish, you may want to use your new router table as a saw, all you would need to do is set the router to a very deep threshold, preferably one that is a lot deeper than you would ordinarily use. Once you have the threshold set, you’re good to go. You may also want to think about turning the piece of over and routing the underside, as this has been proven to work.

Dovetails can be cut using a router table, in fact using a router table to cut this type of joint is fast and very effective. Clamp the tail board into a template, and then use a straight bit to cut all of the pins. This can be a little tricky to do, but a router table usually makes cutting dovetails so much easier than if you were to cut them by hand. Ideally you should make a few test-cuts just to see how effective your dovetails will be, then you’ll be good to go.

Another use for a router table includes cutting straight bits of wood, whether they are long or short. Giving a smooth finish, perhaps a smoother finish than if you were to cut the wood by hand, if you have a big job to get on with, here is where a router table will come into its own. Just make sure you have enough room on either side of the table so that you can cut large or small pieces of wood, and wood that has a curve to it.

Conclusion

If you are looking for a new router table for your workshop or garage, you should find the perfect table in the list above. Take a look at each of the tables and don’t forget to review their pros and cons so you have a good idea as to how they perform, so you get one step closer to finding the right router table for you.

If you have any other questions or worries please contact us, or if you have any comments or improvements please leave a comment at the bottom of the page.

Best Coping Saw 2017 Reviews and Comparisons

If you are looking to do a spot of carpentry or wood working you are going to need a coping saw. The right coping saw can help you to get those jobs done quickly, and with little fuss. However, there are so many different coping saws on the market these days that it’s often hard to know which saw really is the right one for you. Here is where we have come in and helped: we have selected 5 of what we believe to be the very best coping saws on the market right now, making choosing the best saw just that little bit easier.

Product and reviews

The Magic Handsaws Set comes with a multi-purpose saw and a variety of tools that comes in an orange storage case, meaning you can take it with you wherever you go. Sold for approximately $32, this set can be used in a wide variety of areas such as in construction, horticulture, wood working, and carpentry. The saw blade can occasionally pop out of place while it’s being tightened, which could be a little frustrating for some, however, the saw does come with a good reputation. Helping you to cut curved and straight lines, the Magic handsaw set has a blade that has been made from silicon carbide, meaning it’s pretty strong, and the set even comes with a variety of blades making it ideal for a wide range of jobs.

Suitable for those who have just entered the world of DIY, and reasonably priced, the set measures 11 x 1.8 x 7.1 inches, and the saw itself is thought to be easy to use and comes with a comfortable grip.

Pros

  • It comes with a set
  • It is reasonably affordable
Cons

  • The blade can pop out of place

The Knew Concepts 5" fret saw has a unique finish that makes it stand out from the crowd. Complete with a skip-tooth blade, and thought to be hugely innovative, this saw is ideal for those who love to work with wood. Priced at approximately $86, this isn’t a cheap saw by any means, but if you work with wood all the time, you may be prepared to pay the hefty price. Weighing just 5.2 ounces and measuring 13.9 x 10.3 x 1.5 inches, this saw is ideal for use with dovetails. The stiff frame could help to reduce the likelihood of the blade breaking, and the cam lever helps to stiffen the blade in no time at all.

The Knew Concepts blade mounting system means that users can move the blade 45 degrees in either direction, and the fret saw has a great reputation for helping users to get the job done quickly and efficiently

Pros

  • It has a skip-tooth blade
  • It is ideal for dovetails
Cons

  • It isn't cheep

The Robert Larson 540-2000 coping saw is priced at approximately $19, and it comes with a comfortable wooden handle and an adjustable blade. Weighing 9.6 ounces, and measuring 12.6 x 6.2 x 1.9 inches, this saw feels quite durable. There have been a few complaints that the blade pin is not in place, but this can usually be dealt with by hammering it in.

With the ability to work at any angle, and an easy way of adjusting the blade by turning the handle, the Robert Larson 540-2000 coping saw is thought to be ideal for anyone who likes to indulge in a spot of DIY, or needs a relatively cheap coping saw to get a few jobs done. This saw can also be used with standard saw blades with pins, meaning that when the blade that comes with this saw is broken, or no longer usable, it will be easy to get your hands on a blade that works with it.

Pros

  • It is low in price
  • It is quite durable
Cons

  • Sometimes the blade pin is not in place
https://www.amazon.com/dp/B001NI8N2K/?tag=hth-body-20

The Olson Saw SF63510 coping saw is a pleasant-looking saw that comes with a hard wooden handle, and a selling price of approximately $14, making it one of the cheapest saws that we recommend. This particular saw tensions the blade at both ends, meaning it’s stiffer and less likely to bend when it’s being used. The blade can also be moved to any angle, allowing the users to get a wide variety of jobs done with little effort.

The wood handle is not as easy to grip as some users may like, meaning it’s not always comfortable to use, but this saw does have a reputation for cutting well, and making those difficult jobs just that little bit easier. The Olson saw is well-built, and even though it doesn’t look particularly strong, it is thought to be ideal for tackling those occasional jobs that those who occasionally do a spot of DIY may come across.

Pros

  • One of the cheapest coping saw
  • Has a reputation of cutting well
Cons

  • The wood handle makes it harder to grip

The Sheffield 58203 coping saw is the cheapest saw out of the 5 saws we have picked for you. Sold for approximately $9, this saw will not break the bank, but it will help you to get a lot of jobs done. With a chamfered drive end, you can attack the blade very quickly, meaning you can get on with your job when you need to. With a 2-piece design, the 58203 is a strong saw that should work well when used for a variety of jobs. Weighing 9.6 ounces, and measuring 12.6 x 4.7 x 0.9 inches, users cannot by replacement blades that have been made for use with this saw. However, there are quite a few compatible blades on the market, so users should be able to find a blade that works well.

Despite its low price, the Sheffield 58203 coping saw has quite a good reputation, and the rubber handle is quite soft, making it comfortable to use. If you don’t wish to spend a lot of money on a coping saw, this could be the saw to opt for.

Pros

  • It is priced at $9
  • It comes with blade replacements
Cons

  • You cannot buy replacement blades that have been made for use with this saw

Buying Guide

Size

The size of the saw that you end up buying will ultimately depend on the size of the blade you need. The size of the blade can vary between 4 and 6 inches, and this measurement is the distance between the frame and the blade. This area is typically known as ‘The throat’.

Your choice of blade will depend on the type of work that you’re planning to undertake, however, some 4-inch blades can be just as good as some 6-inch blades. One tip when you’re looking to buy a particular sized saw is to take a look at the packaging and see what the saw can be used with. Once you have found a saw that is ideal for the job that you need doing, try to find some replacement blades that fit in the saw. Some blades will be made by the very same manufacturer, whereas others will be made by someone else, but they may still be compatible.

Shape of Blade

The shape of the blade that you buy will be fully dependent on the job that you want to do. For example, if you plan on cutting wood, you will need a blade that is fine or coarse. If you wish to cut tiles, you will need to look for a carbide-encrusted tungsten wire. If you would like to cut plastic, you will need to use a blade that has helical teeth. These are teeth that allow you to cut into the plastic in all directions.

Price

The price that you pay for your coping saw will depend on a few things:

  • How much you ultimately want to pay for the saw.
  • How many times you are likely to use your new coping saw.
  • Whether you think spending a lot of money on a saw means                                      you will get a much better cut.

If you take a look at the saws above you will see that they are all priced differently. Each of these saws are known for their quality, but if you do not want to pay $86 for a saw that you won’t use very often, you may be happier with a much lower price. Some cheaper saws are thought to be just as good as some of the more expensive brands, but again it depends on what you want to use the saw for, and how often you wish to use it.

If you are only planning on using your saw once or twice a month, you may want to opt for the cheapest saw, as you won’t need to spend too much money on it. However, if it’s important that you have a really good quality cut each and every time, it may be worth your while spending more money on a coping saw.

Questions 

What materials can I use it on?

The range of materials that you can use you coping saw on will depend on the blade that you’re using.

Wood - Different coping saws come with different blades, and it’s the difference in the blades that can make the saw ideal for use on a wide range of materials. Some blades are ideal for use on wood, and these blades are usually fine or coarse. The fine blades can cut tight curves, but they are a little slower to use however, they are ideal if you wish to cut a small curve.

Coarse blades have less than 15 teeth per inch, and this means the blade can cut the wood quite quickly, making it ideal when you need to cut a straight line.

Metal - Some blades are made from high carbon steel, and it’s these blades that make the coping saw ideal for use with metal.

Plastic - Place a blade that has helical teeth into your coping saw, so that it can cut plastic.

Tiles - If you would like to cut tiles with your coping saw, you will need to use a carbide-encrusted tungsten wire, so that you can do the job smoothly and relatively easily.

What shape blade should I go for?

As we have already seen, the shape of the blade that you by will be fully dependent on the job that you want to do. For example, if you plan on cutting wood, you will need a blade that is fine or coarse. If you wish to cut tiles, you will need to look for a carbide-encrusted tungsten wire. If you would like to cut plastic, you will need to use a blade that has helical teeth. These are teeth that allow you to cut into the plastic in all directions.

If it’s likely that you’re only going to be cutting wood, it would be wise to opt for a fine or a coarse blade. Coarse blades can help you to cut the wood quickly, making it so much easier if you want to cut the wood in a straight line.

Please make sure you only ever use the right blade, as using the wrong type of blade will result in a less-than-perfect cut, and you could ultimately damage the blade, and the surface you’re trying to cut. Please make sure you always wear suitable protection, as there is always a chance that the blade could snap, particularly if you’re not using the right blade for the job.

How long is the life expectancy?

The life expectancy of your blade and the coping saw itself will depend on how often you use it, and if you look after it. For example, an $86 coping saw could last just a few months if you don’t take care of it, fail to clean the blade, and you don’t store it properly. Alternatively, a very cheap saw could last for years if you take good care of it, store it properly, and always clean the blade after use.

It is hard to say exactly how long a coping saw will last, but if you keep it clean, make sure the blade is tight, you could potentially lengthen its life.

Conclusion

There are some great coping saws on the market right now, and we believe that the above 5 saws are the best out there. Choose from one of the above coping saws so that you can get your wood working and carpentry jobs done quickly, using a saw that works well for you.

If you have any other questions or worries please contact us, or if you have any comments or improvements please leave a comment at the bottom of the page.

Best Corded Drill 2017 Reviews and Comparisons

If you have a lot of jobs to do around your home or in the workshop, you may need to use a corded drill. However, there are so many different types and makes of corded drill on the market these days that it’s often hard to know which is the right one for you. The good news is that we can help you find the right corded drill, simply because we have reviewed 5 drills that we think are the best on the market right now. This means you are one step closer to finding a corded drill that can help you get your jobs done quickly and effectively.

Product Reviews

The DEWALT comes with a 10 amp motor that helps to increase the drills’ performance each time you use it. The motor design boosts power by 50% meaning it’s capable of doing tougher jobs than some other drills. Sold for approximately $130, the DEWALT drill has variable speed and a reversing switch helping users to get even more jobs done.

Weighing 6.9 pounds and measuring 10.2 x 13.1 x 3.2 inches the DWD210G has a soft-grip handle, making it comfortable to use, and the 2-finger trigger means it’s easy to control. The 360-degree locking handle is there to ensure that users have a lot more control, allowing for precise drilling when they need it the most. With a great reputation for being a powerful corded drill and quite a bit lighter than some other models, this piston-grip drill could be ideal for those jobs around the home and in the workshop.

Pros

  • Reliable and sturdy drill
  • Locking handle for greater control
Cons

  • The price is quite high

The SKIL 6335-02 Corded Drill has a pleasant red/black/chrome finish and is sold for approximately $45. With a 7 amp motor and a ½ inch keyed chuck, this corded drill is ideal for use with large bits. The handle comes with side assist meaning you can control the drilling making it more accurate, and the variable trigger speed makes the SKIL corded drill a lot more versatile.

Weighing just 5.6 pounds, and measuring 13.2 x 10 x 3.2 inches the 6335-02 comes with 2-finger trigger helping you to control it with ease. With a keyless chuck and a built-in level, this is a good drill to use if you don’t need anything too powerful.

Pros

  • It is low priced
  • Has ideal for use with large bits
Cons

  • Not as powerful as some drills

The Bosch 1006VSR drill is a sturdy-looking drill and is sold for approximately $59. With a power-to-weight ratio that is thought to be the best in its class, the Bosch drill offers a lot of power even at the slowest rate. With a lock-on switch that has been designed to prevent accidental lock-on, and a belt clip, users could benefit from the hands-free option, so other jobs can be completed.

The large finger trigger makes using the 1006VSR easier, and the keyless chuck holds drill bits very well. Measuring 11.2 x 9.9 x 2.7 inches, and weighing 4.3 pounds, this drill is lighter than some, potentially making it easier to use. With a soft-grip handle and minder brushes that stop the tool when brush replacement is required the Bosch 1006VSR has a lot of power and a good reputation for being a reliable and ideal for jobs around the home.

Pros

  • It is inexpensive
  • It is quite a powerful drill
Cons

  • Medium-speed can be hard to achieve

The Hitachi D10VH2 Variable Speed Drill is sold for approximately $50, making it one of the cheapest good-quality drills on the market. With a 7 amp motor and 133.7 in-lbs of torque, this drill could offer you all the power you need. With a variable speed trigger and a trigger lock-on option, the Hitachi could be a very easy drill to use. Measuring 7 x 2.9 x 9 inches and weighing 3.2 pounds, the D10VH2 is very light, making it easier to use than some larger drills. 

With a rubber-molded handle for comfort and an easy-to-use forward and reverse button, it seems that the Hitachi D10VH2 has been made for ease of use. With a belt hook that allows the users to have it close by, and an all-metal key-less chuck that measures 3/8 inch, this drill could be ideal if you’re new to DIY, or you simply need a drill for occasional jobs.

Pros

  • Very low price
  • It is quite easy to use
Cons

  • It is less powerful than some other drills

The PORTER-CABLE PC600D Variable Speed Drill is a very sturdy-looking drill that comes with a very low price. Sold for approximately $38, this drill is the cheapest drill that we recommend. With a 6.5 amp motor, the PORTER-CABLE may not be the most powerful drill on the market right now, but it does have enough oomph to help you get a wide range of jobs done.

Measuring 10.9 x 3.2 x 10.9 inches, and weighing 4.3 pounds, this isn’t the biggest tool on the market but not everyone wants a huge tool to work with. With the ability to offer you 2,500 RPM, and a variable speed trigger, the PC600D has a key-less chuck and a lock-on button making it easy to use. If you are looking for a drill that you may use from time to time, and you don’t need a lot of power, this could be the perfect drill for you.

Pros

  • It is easily affordable
  • Is ideal for a variety of jobs
Cons

  • It isn’t very powerful

Buying Guide

Power

Some drills come with a lot of power, and some drills have a lot less power. The type of drill that you will end up buying may depend on the jobs that you need to do. If you are going to use the drill to make holes in hard materials you will need a drill that has a slow speed. This is because you will need to take extra care when drilling, and a high-speed drill could potentially make the job quite difficult.

If you are looking to drill into soft materials, you may need to think about purchasing a drill that offers a high speed. This is because the high speed will offer you the chance to get the job done quickly and accurately. However, if you think you may need to use a drill on a variety of materials, you should ideally look for one that offers you a range of speeds. Most drills on the market these days do offer a range of speeds, but some are a little slower or quicker than others.

Torque

Some drills allow you to adjust the force of the drill’s rotation. Being able to adjust the rotation can help to reduce the risk of damaging the material you’re drilling into, and the drill itself. Not every drill offers you the chance to adjust the setting, but if an adjustable torque is what you need, then it’s probably worth your while investing in a drill that has this option.

You may be interested to know that the higher the speed of the drill, the lower the torque is, so be on the look-out for a drill that offers a high speed so you can lower the risk of damaging the material you’re drilling into, and the drill itself. If you’re not sure that the drill you’re interested in buying offers an adjustable torque, take a look at the packaging, or ask the manufacturer/seller for more information.

Model

The model of the corded drill that you end up buying will ultimately depend on a few things:

  • How much you want to pay for a corded drill
  • How often you will use the drill
  • What materials you plan to drill into

If you want to pay less than $50 for a corded drill, you need to understand that the drill won’t be top-of-the-range. If you would like a top-of-the-range drill, you will ultimately have to pay a lot more money. Some of the best drills on the market can cost more than $100, so if you’re looking for a good quality drill that will last a long time, you should be prepared to pay more for it.

When it comes to frequency of use, it’s probably wise to spend less money on a drill if you’re not going to use it very often. This is because some of the cheapest drills are made to be used occasionally. If you are looking for a drill to use quite often then you may need to pay a bit more money as the more expensive corded drills tend to be ideal for frequent use.

If you’re not sure what model you should buy think about what you want to use the drill for, and whether you need it to have a lot of power and torque. Once you know what kind of drill you need, you will have a better idea of which drill is suitable.

Weight

While not everyone considers the weight of the drill to be very important, it really is something potential buyers should pay attention to. Lightweight drills are so much easier to use than their heavier counterparts, but these drills are typically made to be used with lighter jobs around the home. If you buy a heavier corded drill it will be ideal for tougher jobs around the home, and in the workshop too.

Questions

Why Corded?

Corded drills can offer you a lot more power than some cordless drills. They also give you a steady flow of power that shouldn’t fade over time like cordless drills can. Cordless drills come with batteries that need to be charged, which isn’t always convenient or ideal. A corded drill will also give you power when you need it, as well as constantly offering you a lot more power than its corded counterpart.

If you’re building a new garage for example, and you need a drill to help you with a range of jobs, you will need to make sure that you have a power source at all times. Using an extension cord will solve the issue if you don’t have access to electricity in the garage right now, and will mean that you don’t have to spend money on a battery powered drill that could need charging at the most inconvenient times.

What can you use corded drills on?

Corded drills can be used on:

  • Hard or soft wood
  • Starter or pilot holes
  • Metals including steel
  • Countersinking
  • Ceramic and glass
  • Circular cuts for piping
  • Plaster, brick, concrete, and stone

As you can see, there are a lot of different uses for a cordless drill, making them one of the best pieces of equipment you can have in your home or workshop. Of course, some drills may be better at making starter or pilot holes than other models, and some may be better for use with plaster or concrete, but ultimately all drills can be used in a variety of ways.

If you have a lot of jobs to do and you want to get them done properly using a piece of equipment that has a lot of power, use a corded drill.

Conclusion

There are a lot of corded drills on the market right now, but we hope that you can find the right drill for you from the selection above. With the ability to help you work with a variety of materials, and offer you a selection of speeds, each of these drills will help you to get the job done properly. Now it’s over to you to choose the drill you want.

If you have any other questions or worries please contact us, or if you have any comments or improvements please leave a comment at the bottom of the page.

Best Cordless Hammer Drill 2017 Reviews and Comparisons

When you need to get a lot of jobs done quickly and efficiently you need a cordless hammer drill. If you’re going to be drilling into some very hard surfaces a hammer drill can make light work of a heavy task. However, finding the right hammer drill for the job isn’t always as easy as it may seem, simply because there are so many cordless hammer drills on the market right now. Here is where we come in and make your life a little easier: We have reviewed 5 of the best cordless hammer drills on the market right now so that you can get that little bit closer to choosing the right hammer drill for the job.

Product Reviews

The DEWALT DCD996B 3-speed Hammer Drill is a tough-looking drill that comes with a high-performance transmission so that its run-time is extended, and the speed of use is improved. Sold for approximately $170, the DCD996B comes with a 3-mode LED light so that you can see where you’re drilling into, helping to ensure you’re more accurate each and every time.

Weighing 4 pounds and measuring 4 x 10 x 8 inches, the DEWALT has a ratcheting nitro-carburized metal chuck that comes with carbide inserts helping the hammer drill to grip onto bits easily. The 20-volt hammer drill comes with a brushless motor as standard that has the ability to supply 820 unit watts out, which means you can drill into tough surfaces quickly and easily. With a good reputation for having great torque and being a bit of a workhorse.

Pros

  • It has a lot of torque
  • It has extended run-time
Cons

  • A little expensive

The Milwaukee M18 Compact Hammer Drill Kit comes with a tough-looking red and black finish, and a built-in LED light that will help you to see where you are drilling at all times. Sold for approximately $188, the kit comes complete with a battery, charger, and a sturdy-looking case for storing your hammer drill in. offering 525 lbs of peak torque, users can get a wide variety of jobs done quickly. Complete with REDLINK Intelligence the M18 is protected against knocks and scrapes ensuring it has a longer life.

Weighing 9.6 pounds and measuring 13.8 x 3.7 x 11.4 inches, this hammer drill is bigger and heavier than the DEWALT DCD996B, but it is very tough, and it has a good reputation for being perfect for a range of jobs around the home.

Pros

  • It comes with REDLINK Intelligence
  • Offers 525 of torque
Cons

  • It's quite heavy

The PORTER-CABLE PCC621LB Compact Hammer Drill comes with 283 unit watts out, making it ideal for use with heavy jobs. Offering 25,500 BPM, users can benefit by having a hammer drill that gets the job done quickly. The drill itself weighs just 3.6 pounds, making it the lightest drill we have seen so far. The lightness of the drill means that it could be easier to use for hours at a time. Sold for approximately $127, the PCC621LB measures 9 x 6 x 8.75 inches making it a small drill which is ideal if you don’t have a lot of storage space or you’re working in confined areas.

With a 2-speed gearbox, users can alter the speed should they need to, ensuring that more jobs can get done accurately. Complete with 2 20 volt lithium ion batteries, users could have one battery charging while the other is being used, meaning you always have power, no matter where you are, or what you’re doing.

Pros

  • It is very light weight
  • It's one of the cheapest hammer drills
Cons

  • The batteries can take a while to charge

The Dewalt DCD771C2 Compact Drill Driver Kit comes with a lightweight design making it ideal for use in smaller spaces. Sold for approximately $100, this is one of the cheaper models out there. With an ergonomic handle, users should find this drill quite comfortable, even if they are drilling for a long time. Weighing 3.6 pounds the Dewalt is just as light as the  PORTER-CABLE model, and measuring 13.9 x 9.9 x 4.2 inches it isn’t the smallest drill, but it does have a good reputation for being very powerful.

Offering 300 unit watts, and with a high-speed transmission, the  DCD771C2 is definitely worth considering. Complete with a battery charger, battery and a durable bag for storage, this model is definitely set to impress.

Pros

  • Light weight
  • Has a reputation for being powerful
Cons

  • After 12 months you have to think about changing the battery

The Makita XPH102 Hammer Driver-Drill Kit has a very robust-looking black/silver/blue finish and comes with a sturdy storage case as standard. Sold for approximately $288, this kit is the most expensive one we have seen so far, but it does come with some impressive features. Offering 480 lbs of torque and with 2-speeds, this is a driver-drill set that would prove to be very useful on a construction site, around the home, or in your garage. With extreme protection technology which helps to keep the drill water and dust resistant, users may be interested to know that once the battery has been added the unit only weighs 3.9 pounds.

With an 18-volt lithium battery and thought to be one of the fastest drills to charge, this driver-drill can also be used as a hammer driver-drill for added convenience.

Pros

  • It is equipped with 480 lbs of torque
  • It is very fast charging
Cons

  • Can be quite expencive

Buying Guide

Power

When it comes to the issue of power there are some hammer drills that offer you quite a lot of power and there are others that offer you less. The amount of power that you’ll need will depend on the kind of jobs you need to do, and where you are working. If you need to use a hammer drill so you can get jobs done around the home, you may not need one that’s as powerful as those you would find on a construction site. So for example, one of the Dewalt drills or the PORTER-CABLE drill might be ideal for use around the home, whereas the Makita drill offers a lot more power and may be ideal for those tougher jobs on construction sites.

Torque

The higher the torque, the more powerful the drill’s force is. Some cheaper hammer drills do not come with very much force, whereas some more expensive models do. If you’re looking for a hammer drill that will be used occasionally, you may not need to opt for one that has a lot of torque, which means you could save a bit of cash. If you do need a drill with a lot of torque you should be prepared to pay that little bit extra.

Some hammer drills will allow you to adjust the drill’s force, being able to do this can reduce the risk of damaging the material you’re drilling into. It can also help to protect the drill as well.  While not every drill will offer you the chance to adjust the torque if an adjustable torque is what you need you may want to think about investing in a drill that has this option.

Model

When it comes to selecting the right model of cordless hammer drill you will need to buy the right drill for the jobs that you need to do. Let’s take a look at the considerations you will need to bear in mind when shopping for a cordless hammer drill:

  • How much you want to pay for a cordless hammer drill?                                          If you want to pay less than $100 for a cordless hammer drill, you should know that the drill you buy will not be one of the best drills out there, in fact, it may not be powerful enough for the jobs that you need to undertake. If you would like to buy and use a top-of-the-range cordless hammer drill you should be prepared to spend at least $150 on it. Good quality cordless hammer drills are often worth the extra money as they have the potential to last for 5-10 years.
  • How often you will use the hammer drill?                                                                    If you’re not going to use your new hammer drill very often it wouldn’t make sense to spend a lot of money on it. Of course, you may want a good quality cordless hammer drill, but you may not need to pay a very high price for something that is going to sit idle in your workshop. If you think you might use your new hammer drill fairly often, you might want to think about paying a bit more for it as it will be built to use again and again and again.
  • What materials you plan to drill into?                                                                            A hammer drill can be used to drill into brick, mortar, concrete, and stone when used with a masonry bit. If you are planning to drill into any of these materials you will need to use a hammer drill as a regular drill will not be powerful enough, and you could damage it.

Weight

While not everyone considers the weight of the drill to be very important, it really is something potential buyers should pay attention to. Lightweight drills are so much easier to use than their heavier counterparts, but these drills are typically made to be used with lighter jobs around the home. If you buy a heavier corded drill it will be ideal for tougher jobs around the home, and in the workshop too.

Questions

Why Cordless?

Cordless hammer drills can be something of a life-saver if you need to do a lot of work in a large area, or you simply need the flexibility to work with large slabs of concrete. A corded hammer drill could ultimately hold you back as you will have to make sure you are near a power outlet at all times.

Some cordless hammer drills also come with a belt hook, meaning you can pop it into your belt when you don’t need to use it, and pick it back up again when you do.

Please make sure that you plan ahead and think about when you will need to use your new cordless hammer drill so that you can make sure your battery or batteries are charged in time. Ensuring that you have a charged battery means that you won’t have to stop work, getting started again when the battery is ready to go.

If you think the battery may run out of power before you have completed your job, why not consider purchasing a second battery so you can have one charging while you’re using the other one?

What can you use hammer drills with?

As we have already seen a hammer drill can be used to drill into brick, mortar, concrete, and stone when used with a masonry bit. Hammer drills tend to work a bit like a regular drill does as it rotates just as a regular drill does, but it also has a hammer-like action, making it suitable for use with harder surfaces.

Conclusion

There are a lot of cordless hammer drills on the market right now, but we hope that you can find the right hammer drill for you from the selection you can find above. With the ability to help you drill into some very tough materials without being held back by a cord,  your new cordless hammer drill may prove to be one of the best purchases you have made.

If you have any other questions or worries please contact us, or if you have any comments or improvements please leave a comment at the bottom of the page.

Best Miltre Saw Blade 2017 Reviews and Comparisons

Finding the right miter saw blade is not always that easy, particularly as there are so many different blades on the market right now. Some miter saws need to be used with very specific blades, whereas others can be used with a range of compatible blades. Regardless of what type of saw you have, you may struggle to find the right blade. However, we have made life a little easier for you and reviewed 5 of the very best blades so you can get that little bit closer to finding the right blade for the job. Take a look below for more information:

Product Reviews

The DEWALT DW72100PT saw blade has a 12-inch circumference and a pleasant black/yellow finish that buyers of DEWALT products will recognize. Sold for approximately $158, the blade has ultra-sharp edges that mean splintering is reduced dramatically. With a tough coat finish and dampening slots that help to reduce vibration, users should find that this blade is one of the best products on the market.

With a great reputation for giving an excellent cut, the blade weighs just 2.8 pounds, and measures 15.1 x 13.3 x 0.4 inches and comes with a coated finish that helps to reduce friction and heat. The laser-cut body allows users to achieve a very accurate cut, and the carbide teeth look as though they will cut through just about anything. If you are looking for a great quality saw blade that will make light work of your jobs, the DEWALT DW72100PT could be the right choice for you.

Pros

  • It has carbide teeth
  • Coated finish which reduces vibrations
Cons

  • It is the most expensive out of our choices

The DEWALT DW3106P5 is a much smaller blade than the previous model, but this does not mean that it is not a good quality product. Sold for approximately $32, the DW3106P5 comes with 10 inches of toughness, and 2 blades. Made with tough tungsten carbide, the blades will stay sharper for much longer than many other blades, and the thin kerf is there so you get a very smooth cutting action.

Ideal for use on slide miter saw and miter saw jobs, these blades have a reputation for not wearing down easily. Weighing 3.2 pounds in the box, and measuring 14.5 x 11.4 x 0.6 inches these blades can be used for cutting wood composites, plywood, and natural wood. With 60 teeth, and the ability to offer a precise and even finish, the DEWALT DW3106P5 are well worth considering.

Pros

  • It cuts wood composites, plywood, and natural wood
  • It is made of tough tungsten carbide
Cons

  • It is aimed at cutting woods

The Freud 12 Inch sliding miter saw blade comes with a nice red finish and is ideal for radial arm saws and miter blades, Sold for approximately $88, this blade has 72 teeth, and a negative hook which helps to minimize climbing, so you have better control. Allowing for a faster feed rate and ideal for use on laminate, crosscuts, plywood, chip board and rips wood, this blade has a good reputation for being a reliable blade.

The Perma-SHIELD coating has been added to protect against pitch build-up, corrosion, and gumming so that the blade lasts longer.  Weighing just 2.4 pounds, and measuring 11.8 x 12.3 x 0.7 inches, the Freud 12 inch blade has an anti-vibration design and has added carbide so its cutting edge is sharper. A good solid blade, suitable for a wide variety of jobs, the Freud 12 inch could be exactly what you need.

Pros

  • It has a negative hook helping to minimize climbing
  • Has anti-vibration design and has added carbide so its cutting edge is sharper
Cons

  • It is priced at the higher end of the price range

The Freud D12100X circular saw blade is ultra-fine, and is ideal for use on wood and wood composites. Sold for approximately $96, this blade has been manufactured for use with miter saws, and comes with a laser cut stabilizer, which helps to reduce vibration and noise whilst stabilizing the blade at the same time. Weighing 3 pounds, and measuring 1 x 14 x 16 inches, the Freud D12100X has a reputation for producing a professional finish and being ideal for occasional use.

The shear-face design allows for easily cuts with a lowered am draw, and helps to maximize performance while also producing less waste. With a 15-degree hook angle, this blade could be ideal for all of your jobs, whilst producing less noise and waste so you have a more enjoyable user experience.

Pros

  • It can change speeds from 2,000 RPM – 5,200 RPM
  • Has built-in torque limiter which works to prevent burnout
Cons

  • Needs a change of blade

The Makita A-93681 10 inch saw blade has a clean silver finish and is sold for approximately $30. With 80 carbide teeth and hand tensioned steel saw plates, this blade is thought to be ideal for use with plywood, hardwood, and softwood. Weighing just 1.7 pounds, and measuring 12 x 11.8 x 0.2 inches, this blade has a good reputation for being of excellent quality and offering a very smooth cut.

The carbide teeth have been honed and have up to 600 grit so there is a mirror finish. The hook angle is 5 degrees, and the thin kerf measures just 0.91 inches with a plate thickness of 0.71 inches. If you are in the market for a 10-inch blade, the Makita A-93681 could be exactly what you need.

Pros

  • It is priced at $30
  • Can be used on plywood, hardwood, and softwood
Cons

  • It isn't suited for metals

Buying guide

Slide action

Some saws come with a slide action that allows the user to cut very wide pieces of wood. If you are looking to use a slide, action saw, you would need to make sure that the blade is suitable for this. If the blade you are using is not suitable for use in a slide action saw, you will need to purchase one that is. The size of the (suitable) blade and its specifications will tell you whether it is suitable for use in this type of saw. If you plan to cut very wide pieces of wood, you will need to use a big blade that has a larger width that can be used in a sliding saw.

Size of blade

The type of blade that you buy will be determined by the type of material you wish to cut. The blade itself will also determine the depth of the cut. A blade that comes with a 30mm bore is ideal for use in a saw that has a 30mm bore. You will need to check your user manual for information about the blade diameters that you can use, so make sure you read up on this and only stick to using blades that are within the suggested minimum and maximum range.

When it comes to the diameter of the blade, you will need to make sure that you use the right size blade as per your saw. If you use a blade that is too large, you may end up damaging the guard that you have fitted, rendering it unsafe. Always use the recommended diameter so you are working safely and effectively.

Some miter saws come with an 8-inch blade, but others have a 10 or 12 inch blade. The size of the saw will depend on the job that you need to do. Some blades are multipurpose, which means they can cut more than one different type of material, but you will find there are also specific blades for use with specific materials. For example, some blades are made to be used with wood, others with aluminum, and others with steel. It is therefore important that you buy the right blade for the job. 

Questions

How long will it last?

The life of each miter saw blade would differ depending on what material you are cutting, and how well the blade has been made. You can potentially extend the life of your blade if you keep it clean, and only use it with the right materials. You may need to have your blade re-sharpened from time to time, and doing so could extend its life, meaning you could have the same blade for up to 10 years. Once your blade has been re-sharpened, wipe a little bit of oil onto the washers that touch the blade so that it stays lubricated. This will lengthen the blades life, and make cutting so much easier.

Some blades are inevitably better quality than others, meaning some will last a year or two, and others could last 10 times as long. It all depends on how much money you are willing to spend, and how often you use your saw.

How to attach a blade

Attaching a blade to a saw is not that difficult, but the methods you use can depend on the saw’s make and model. However, once you have changed one saw blade, you will know how to change blades on most other models out there.

To begin with, you need to ensure the saw is turned off. Then remove the blade guard by loosening the screw, once you have done that simply move the guard out of the way. Press the spindle lock so that the blade is secure, and then take an Allen wrench and use it to turn the bolt that holds the blade to the saw. Remove the outer washer and dispose of the blade carefully.

Read your user is manual to make sure that you know how to replace the blade. Some makes and models do differ in their replacement guide, so be sure to follow the instructions. Wipe a little bit of oil onto the washers that touch the blade so that it stays lubricated. Now take your new blade and install it so that the teeth are facing down. Put the outer washer back on, and tighten it. Now fasten the bolt with your Allen wrench so it is nice and tight. Now take a screwdriver and attach the blade guard. Your saw blade should now be ready to use.

Should you buy a cheap blade and often or expensive and long-term?

Some miter saw blades can be quite expensive and their price could ultimately prevent you from buying them. Some cheaper models are thought to be just as good as some of the more expensive ones, but some of them are not so great. If you plan to be, using your miter saw a lot, you may want to think about buying a more expensive blade, as you could have the same blade for up to 10 years.

If you are not planning to use your miter saw very often, then a cheaper blade may be ideal. Please make sure that you only ever use a blade that is thought to be compatible with your saw, as using the wrong type of blade could cause serious injury.

As we have already seen, some blades are inevitably better quality than others, meaning some will last a year or two, and others could last 10 times as long. It all depends on how much money you are willing to spend, and how often you use your saw.

Should you buy the same brand as your Miter Saw?

The manufacturers of your miter saw are likely to state that you should only use the saw blades that they recommend. However, some cheaper saw blades are likely to be compatible with your brand, although the quality of the cut may not be quite as good. If you need to use a blade that has a high quality cut, you may want to stick with using the same brand as your miter saw, however if you don’t need a high quality cut, a cheaper brand may work just as well. Please note that if an issue with your miter saw arises while you are using a cheaper blade, your warranty may no longer be valid. It may, therefore, be wise to keep using the right branded miter saws until your warranty expires.

Conclusion

By now, you should have a much better idea about the type of miter saw blade you wish to buy. Think about what you need it for, how often you are going to use it, and of course, how much you are willing to pay for it. Use the above blades as a guide so you are that little bit closer to finding the right miter saw blade for you.

If you have any other questions or worries please contact us, or if you have any comments or improvements please leave a comment at the bottom of the page.

Best Track Saw 2017 Reviews and Comparisons

If you’re looking for a track saw to help you cut long pieces of wood you may be forgiven for thinking there are a lot of different saws on the market. Finding the right track saw for you can potentially be quite hard as most models claim to be the best there is, making selecting a track saw quite difficult. The good news is that we have compiled a list of the 5 best track saws around, so your job is a lot easier. Take a look below for more details about the 5 best track saws on the market right now:

Product Reviews

Festool TS 55 REQ Track Saw is a modern-looking track saw that comes with a clean silver, black and green finish, Sold for approximately $660, this track saw allows the user to achieve straight cuts that are also splinter-free. With a spring-loaded riving knife that works to keep the kerf open, users will find there is less kickback, making the Festool a little easier to use.

The TS 55 REQ is quite costly, and potential buyers may, therefore, look for a cheaper model, but if you are prepared to spend the money, you could end up with a reliable track saw that has the potential to last for many years. If you purchase this track saw you will need to make sure that you have a surface that has been designed to use with a track saw, otherwise you could find your job is a little harder than it really needs to be. With a good reputation, and easy to change blades, the Festool TS 55 REQ Track Saw weighs 17 pounds, measures 12.2 x 11.5 x 15.5 inches. and is considered to be very easy to use.

Pros

  • It is modern-looking, with a clean silver, black and green finish
  • Is will have less kick back than other track saws
Cons

  • It is quite high in cost

The DEWALT DWS520SK Tracksaw kit comes with a zero-clearance cutting system which means users can benefit from splinter-free cuts that are straight and precise. Sold for approximately $480, and weighing 25 pounds, the DEWALT is heavier than the Festool saw, but it does cost considerably less. With the ability to cut at a depth of 54 millimeters at 90 degrees, and 41 millimeters at 45 degrees, the DWS520SK is set to impress. Measuring 61 x 14 x 12.5 inches, this particular saw is known for occasionally pulling the track to the side, making it hard to cut in a straight line.

With a 1300 watt motor that can cut through wood that’s 2-1/8 inches thick very easily, and the ability to collect dust efficiently, this track saw is set to impress. With an anti-kickback mechanism that works continuously, and an accurate depth scale the DEWALT DWS520SK Tracksaw kit could be the ideal tracksaw for you. Complete with a 59 inch track, you could get your jobs done with very little effort.

Pros

  • It comes with 59 inches of track
  • It is equipped with zero-clearance
Cons

  • It has been known for occasionally pulling the track to the side, making it hard to cut in a straight line.

The DEWALT DWS520K is the same tracksaw that we have already seen, but this kit does not come with a track. Sold for $440, the DWS520K offers splinter-free cuts and a low profile blade that makes it ideal for use in small and somewhat confined spaces. With a rivet knife that works to prevent kickback when the knife is engaged, you should find this tracksaw kit to be reasonably good to work with. Weighing 11.5 pounds, and measuring 12.4 x 18.1 x 12.1 inches, the saw’s can occasionally become stuck in the ‘Off’ position, making it a little trickier to use at times. However, with a good reputation, the DEWALT is ideal for crosscutting, door trimming, gang cutting, and edge joining, as well as many other jobs, making this particular kit a worthwhile investment

Pros

  • It comes with a 1300 watt motor
  • It can cut through wood that’s 2-1/8 inches thick very easily
Cons

  • It is similar to the DWS520SK but hasn't got the track

The Makita SP6000J1 6 ½ inch Plunge Circular Saw comes complete with a 55-inch guide rail and a 12 AMP motor that is considered to be ideal for cutting a wide variety of materials. With the ability to retain the same speed, the Makita offers a smooth cut. The variable speed control option allows users to choose speeds from 2,000 RPM – 5,200 RPM meaning they can have as much or as little control as they like. Sold for approximately $410, and complete with a stackable tool case, the SP6000J1  weighs 8.8 pounds and measures 16 x 12 x 13 inches.

With a built-in torque limiter which works to prevent burnout, and the ability to make cuts very precise, this plunge circular saw is light enough that it can be carried to multiple places, meaning it can be used in a wide variety of ways. The blade does have a reputation for being cheap and not always delivering a very good cut, but if you don’t need a precise cut, this could be the saw you need.

Pros

  • It can change speeds from 2,000 RPM – 5,200 RPM
  • Has built-in torque limiter which works to prevent burnout
Cons

  • Needs a change of blade

The SHOP FOX W1835 Track Saw is a very modern-looking track saw with a gray/silver finish. With 5,500 RPM, and a 160 mm blade this saw is sold for approximately $188, making it one of the cheapest on the market. Weighing 12.8 pounds, and measuring 10.6 x 13.4 x 9.5 inches, the SHOP FOX has a 6-foot cord, and a reasonable reputation.

Complete with a dust port that can be connected to a collection system or a shop vacuum, this track saw tries to keep your work area tidy.  Considered to be slightly under-powered, the W1835 may be ideal for lighter jobs, and therefore perhaps not ideal for a wide range of jobs. The plunge action means that there is no need for a flip-up blade guard, and the saw has the ability to cut up to 45 degrees, making it ideal for occasional use.

Pros

  • It has 5,500 RPM
  • Has a 160 mm blade
Cons

  • Would suet less heavy duty work

Buying Guide

Size

In some respects, the size of the track saw can be quite irrelevant, simply because the over-all size may not be indicative of the size of the blade. However, if you are looking to use a tracksaw in a confined area, this is where size will begin to matter. Track saws that come with a low profile blade, such as the DEWALT DWS520K are ideal for use in smaller areas, and are therefore ideal if you have a small workshop, or you simply don’t wish to use a large track saw.

The fact that you can cut your wood on site means that you don’t have to look for extra space where you can cut the wood to size.

Depth of Cut

If you are looking for a blade that has a very specific depth of cut, you may be pleased to find out that many blades have a good depth. The depth on most track saws can be preset, meaning you can choose the depth that you need, every single time.

When you push the track saw forward the riving knife is lowered meaning you get a safe cut every single time.

Anti kick back

The anti-kick back feature that is present on most track saws makes the tool so much easier to use. If your track saw did not have this feature using it would be quite a bit harder as the saw would move slightly in response to the wood it’s cutting. With the anti-kick back feature, you should feel no kick back at all, or very little kick back at least. This means you can get on with the job in hand with minimal fuss, knowing you can cut as straight as you like.

Dust Collection

The dust collection feature which is present on most track saws is perhaps one of the best features that the saws have. If you have ever used a saw or another power tool that does not collect dust, you will know how hard and messy jobs can be. Occasionally dust may even get in the way of your light of sight, meaning you may not be able to saw in a straight line. This could ultimately mean that you cannot get the job done properly.

The dust collection/extraction feature is ideal for those bigger jobs, and in most cases, the collector is in the same position where the dust is generated, meaning you will have a much cleaner cutting process, without worrying about making a mess.

Some saws come with the option for you to connect the dust collector to a collection system or a shop vacuum. The option of connecting the collector to the shop’s vacuum could potentially make life a lot easier for you if you tend to collect all of your dust in one place. However, if you are happy to use the on-board collection system, you can simply empty it when it’s full, or at the end of every job.

Questions

Can a track saw replace a table saw?

In some cases a track saw can completely replace a table saw if you’re looking to make miter or crosscuts. A track saw can make these jobs so much easier, however, this type of saw isn’t ideal for jobs that include rip cuts. This ultimately means that you may still need to use a table saw, whilst also using your new track saw.

Some track saw users will tell you that you can use a track saw in place of a table saw, however, it does entirely depend on the jobs you want to do, and how much wood you need to cut. Before you get rid of your table saw it would be wise to find out which jobs your new track saw can do, and which ones it can’t do. If for example, you won’t ever need to do any rip cuts, a track saw may be the only tool that you need.

What is a track saw used for?

A track saw is used for making very straight cuts whilst using a track, which may also be known as a ‘Guide’. Track saws are thought to be absolutely ideal for those jobs where you need very smooth and highly accurate cuts. Most table saws and circular saws will not offer the same quality of cut that a track saw offers, so if you are looking for a very smooth and high-quality finish, this is the type of saw to go for.

How to use a track saw?

Ensure that the blade you’re using is sharp enough, blades that aren’t sharp will not do the job properly. Once you’re satisfied that the blade is ok, adjust the riving knife and ensure it’s aligned with the blade so as to help prevent kickbacks.

Now you need to set the right cutting depth, make sure you set it properly as the right depth will result in a good cut. Try not to set the depth too deep as it could compromise the cut’s quality. Now take hold of the saw, and hold it firmly so you don’t get much kickback.

You should consider using a track rail that will help to guide the saw along, while making accurate cuts. An added benefit of using a track rail is that it also works as a safety feature helping to protect the user from splinters that can be quite nasty.

Before you make your first cut you should make sure that the cutting path is clear, and nothing is going to get in the way of the saw. Once you’ve established that the cutting path is clear, press both power buttons at the same time. 1 button will lower the saw, and the other will get the blade moving. Now you need to wait for the blade to get up to full-speed, as doing so will help to prevent some kickbacks. Now you’re ready to cut.

Conclusion

Finding the right track saw can be hard, but hopefully we have made life a little easier for you. The above track saws are thought to be the best on the market right now. Why not consider purchasing one of the above track saws so that you can get a wide range of jobs done with very little effort?

If you have any other questions or worries please contact us, or if you have any comments or improvements please leave a comment at the bottom of the page.

Best Palm Sander 2017 Reviews and Comparisons

If you tend to do a lot of sanding, and you don’t need to use a large sander, a palm sander may be exactly what you need. Offering more control, and the chance to sand a wider variety of materials that come in different shapes and sizes, palm sanders could help you to achieve a better finish, in no time at all.

There are a lot of palm sanders on the market, however, we have picked what we believe are the palm sanders for sale right now. Take a look at the list below for more information about the sanders we have chosen, and pick the right one for you.

Product Reviews

The DEWALT DWE6421K  is a tough-looking palm sander that comes with a 3.0 amp motor, and a yellow/black finish. With the ability to spin the sanding pad at an impressive 12,000 OPM, this sander means business. Weighing just 4 pounds, and measuring 10.4 x 7.2 x 6.2 inches, the DEWALT also comes with dust protection and a one-hand locking system on the dust bag.

This particular sander has a lower height than some, meaning that it lets you get that little bit closer to the materials you are sanding. This feature could help you to sand the right areas correctly, and effectively. Complete with a manual, dust bag, and a DEWALT bag for storing your sander in, the DWE6421K is sold for approximately $70 and comes with a good reputation for getting the job done quickly and effectively.

The Bosch ROS20VSK is a 5-inch orbit palm sander that can be used at a variable speed, so you can adjust it depending on the job in hand. With an anti-spill canister design, this model helps to minimize the amount of dust that is sent back into the sander. Weighing 3.5 pounds, the Bosch ROS20VSK is a little lighter than the DEWALT model, and measuring 9 x 5 x 6 inches it’s also smaller too. The smaller size does not necessarily mean that the Bosch is not as effective, it just means it’s ideal for users with smaller hands.

Priced at approximately $79, this model offers speeds of up to 12,000 OPM, and as little as 7,500 OPM, meaning you can adjust the speed so it’s suitable for the job you’re doing.  The ergonomic soft grip, allows the users to hold the sander in a variety of ways, so they have that extra level of comfort at all times. Complete with a case, and a good reputation, the Bosch ROS20VSK may not look as tough as the DEWALT model, but it certainly knows how to get the job done properly.

The DEWALT DWE6411K comes with a 2.3 AMP motor, and sands at an impressive 14,000 OPM, meaning it works a little harder than the previous DEWALT model. Weighing just 2.8 pounds, this sander is the smallest one we have seen so far, making it ideal for those who don’t like to use heavy tools. Battery powered, and measuring 7 x 6 x 10 inches, the DEWALT DWE6411K has a rubber overmold texture which enables the user to have smoother and more comfortable control.

Complete with a paper punch, carrying bag, and a dust bag, this model is sold for approximately $54, making it the cheapest so far. Just like the DEWALT DWE6421K, this model also comes with a reduced height, meaning that it lets you get that little bit closer to the materials you are sanding, and with a smooth yellow/black finish and a good reputation, this sander could be the right one for you.

The Gedu B01MZ1PTMY is a unique-looking palm sander, that has been made to last a very long time. With a yellow/red/black finish, the sander spins at 12,000 RPM, and it comes with a built-in regulator, helping you to control the speed more effectively.

 Thought to be ideal for overhead and vertical sanding, the Gedu comes with a rear exhaust, and is ideal for use on many different kinds of metal. Weighing just 2.4 pounds, and made from a composite plastic body, you may find this model so much easier to use, thanks to its low weight. Measuring 8.9 x 6.5 x 4.8 inches, this is not the smallest sander around, but it has certainly earned its place in the top 5. Sold for approximately $61, and powered by air, the Gedu B01MZ1PTMYhas a good reputation, and with a unique look, it will certainly stand out from the rest of your tools.

The SKIL 7302-02 sander is a robust-looking piece, that comes with pressure control technology, allowing you to get an optimal finish on the materials you are sanding. With 8 sanding attachments, and a clear dust canister, you will know exactly when it’s time to empty the container. Weighing 5 pounds, theSKIL 7302-02 is the heaviest sander that we have seen, and measuring 6.2 x 10 x 6 inches, it’s not the smallest, but it isn’t the largest either.

Complete with 8 detail attachments, you can sand a wide variety of materials and surfaces that can often be hard to reach. Sold for approximately $40, and with a reasonable reputation, the SKIL 7302-02 could be ideal if you have a lot of different jobs to do, and you want a sander that is flexible enough to do them with ease.

Buying guide

Size

The size of the palm sander that you buy will depend on a few things: what you need the sander for, how much you’re willing to pay, and how large or small your hands are.

Some large sanders are capable of sanding a large surface area in one go, making them ideal for those larger tasks that you need to get done quickly. Smaller sanders will cover a smaller surface, but they do allow you to have a little more control, meaning you can sand an area as much or as little as you like.

Some larger sanders can be slightly more expensive than the smaller ones, but this is not always the case. Prices can and often do vary between makes and models, so you will need to think about how big you need your sander to be, and how much you are willing to pay for it.

Lastly, many sanders have been made so that they can be operated by people with large hands. However, if you have small hands, you may want to opt for a sander that has a slightly smaller handle. Try to look for a sander than comes with a smaller handle, so you can grip it properly, and thereby have a lot more control.

Shape

Sanders come in all sorts of shapes and sizes, giving you the chance to choose the right sander for the jobs you need to do. Some sanders sit more upright than others, while some offer you the chance to work that little bit closer to the surface so that you have more control over what you are doing.

Some sanders come with rubber pads that can be interchanged, so you can sand carvings, moldings, and other surfaces. Others come with a pointed or triangular pad that allows you to sand some tight areas and corners.

Power

The more power a sander has, the faster it works, but if you are using a small sander that does not have a lot of power, you may not necessarily get the job done quickly. If you want a sander that has a lot of power, and covers a large area, you may find it hard to control. Of course, we all want to use a sander that has the ability to get the job done quickly, but if that means the quality of the job is not what you hoped it would be, you may have to opt for a slightly less powerful model.

Corded or Not

Corded sanders typically allow you to work as long as you need to, whereas battery powered sanders will only work until the battery runs out. The benefit of using a battery sander is that they are generally a lot safer to use as you don’t have a cord to avoid tripping over. Corded sanders may also limit your reach as they need to be used near an outlet, where as a battery-powered sander gives you the opportunity to use it where you please, without restriction.

Please make sure you always have some spare batteries to hand, so you can replace them when you need to.

Dust Collection

Sanding even the smallest surface can create a lot of dust, this is why it is recommended that you purchase a palm sander that comes with a dust bag. Some dust bags are bigger than others, and some even show you how much dust you have collected, so you can empty the bag when you need to. Try to opt for a palm sander that has a bag that’s easy to remove, empty, and re-attach so you can get back to sanding in no time.

Questions

Do I need variable speed?

Some palm sanders offer variable speed, allowing you to get greater control when you need it the most. The speed of a sander is dictated by the length of the strokes. A sander with a shorter stroke will have a slower speed, and a sander with a longer stroke will offer you a much quicker speed.

Sanders that come with variable speeds are usually ideal for sanding soft wood, allowing you to switch between finishing work, rough sanding, and back again. If you plan to be doing a lot of different jobs, you may wish to opt for a variable speed sander so that you have the right amount of speed when you need it the most.

How much should I pay for a palm sander?

As we have seen, palm sanders do differ in price, and while you may be tempted to opt for the cheapest palm sander you come across, it may not necessarily have the features that you need (Variable speed, different attachments etc.). If you would like to pay as little as possible for a sander, you may ultimately be missing out, and you could even find that you need to buy an additional sander so you can get the job done properly.

Look for a sander that is at least $50, and offers you everything you need, and perhaps a little bit more. For example, you may not currently need a palm sander that comes with 8 different attachments, but if it’s likely that you will in the near future, it would be wise investing in one now.

How much power should I get?

As we have already seen, the more power a sander has, the faster it works, but if you are using a small sander that does not have a lot of power, you may not necessarily get the job done quickly. If you want a sander that has a lot of power, and covers a large area, you may find it hard to control. This is why beginners are encouraged to use a sander that has a lot less power. Once you have become used to sanding, you may want to opt for a more powerful sander, should you need one.

What other things do you need?

When using a palm sander, you will need to make sure you have enough sander paper to get the job done. Sanders typically come with a few sheets of paper, but it’s likely that each sheet will get worn down quite quickly. It would, therefore, be sensible to have enough sander paper in stock before you get to work. Please note that sander paper does vary in size and shape, so you will need to make sure that the sander paper you buy is compatible with your palm sander. The good news is that sander paper is relatively cheap, meaning you can get plenty in stock so you can finish the job on time, without interruption.

Conclusion

The right palm sander for you will depend on your budget, how much power you need, and what you need to use it for There are a lot of different palm sanders on the market right now, but we are confident that you will find the right sander for you in the above list.

If you have any other questions or worries please contact us, or if you have any comments or improvements please leave a comment at the bottom of the page.

Best Torque Wrench 2017 Review and Comparisons

If you’re about to undertake a variety of jobs that might include unscrewing nuts and bolts that are tight, you will need to buy a torque wrench. A torque wrench can help you get a grip on that really tight bolt that just doesn’t seem to want to budge, making your life so much easier. There are many different types of torque wrench on the market today so it may be hard to choose the right one, so we have done a bit of research and reviewed what we think are the 5 best torque wrenches, so you are a little bit closer to finding the right one for you.

Products Reviews

The Precision Instruments PREC2FR100F Torque wrench comes with a nice stainless steel finish and is constructed from steel ensuring that the wrench is not affected by abuse or fluids. With a calibration compliance certificate and thought to be accurate within 4% of reading, this particular wrench is easy to set particularly as there is no spring tension.

Weighing just 2.4 pounds the wrench isn’t the heaviest on the market, making it so much easier to use than some slightly heavier models. Measuring 2 x 2 x 18 inches, the Precision Instruments wrench has a good reputation for being easy to use, and is sold for approximately $119. The length of the wrench allows users to have as much leverage as they need, and with the ability to offer 20-100 lbs, helping you to get a wide variety of jobs done quickly and efficiently.

The ACDelco ARM601-4 comes with an LCD display that shows the reader the measurements in ft-lb, kg-cm, in-lb, and Nm. Complete with an audible buzzer, this wrench will let you know when the torque value has been reached. Sold for approximately $117, the ACDelco wrench takes 3 AAA batteries and can range from 4-99ft-lbs, making it ideal for those ‘Lighter’ jobs that require the use of a torque wrench.

Weighing 4 pounds, and measuring 1.5 x 1.5 x 17 inches, this model also comes with mode setting, measurement setting, and torque setting. Thought to be ideal for car enthusiasts, and with a soft comfortable grip, this model comes with a red/black finish and a reputation for being reliable.

The TEKTON 24335 is priced at approximately $61, making it a relatively cheap model that comes with a breaker bar, allowing the user to work at almost any angle. When the torque value has been reached the TEKTON will emit a clicking sound, so you know you’re good to go. The ratchet head is reversible so that you can use it in both directions if you need to.

Pre-calibrated, and complete with a 24-inch breaker bar, this model has no plastic components, ensuring that it does not wear out or break. Complete with a red storage case, and an easy-to-read dual-range scale, if you don’t want to spend a lot of money on a torque wrench, this may be the ideal model for you.

The Craftsman 9-31425 comes with a twist ring that has lock and unlock settings, and is thought to be accurate to +/- 4%, which is the standard rate of accuracy for torque wrenches. Sold for $60, this is the cheapest model that we have seen so far, and with a reasonably good reputation, it’s the ideal wrench to have if you are just starting to do a bit of DIY.

Weighing just 1 pound, this torque wrench is incredibly light, making it ideal for those who struggle to use heavy tools. Measuring 13 x 3 x 3 inches, this model ranges from 20-150 ft. lbs, meaning it can do slightly more than some of the previous models we have looked at. With a reputation for being a good ‘Starter’ torque wrench, the Craftsman 9-31425 has visible torque settings and is ideal for occasional use.

The TEKTON 24340 comes with an all-steel construction which makes it more durable than similar models that come with plastic parts. Sold for approximately $52, and with a 25-250 ft-lb, this model is capable of helping users undertake a wide variety of work. With a dual range scale that is quite easy to read, and weighing 4.4 pounds, this model is the heaviest we have seen, but that doesn’t mean it’s hard to use. Pre-calibrated, and with a reversible ratcheting head, the TEKTON 24340 emits a click so you know when you need to apply no more force.

Measuring 1 x 25 x 1.25 inches, this torque wrench is the longest wrench we have seen, enabling users to gain a lot of leverage when undertaking work. With a good reputation, and complete with a storage case, this model is ideal if you need to get a lot of jobs done, but you don’t want to pay very much more than $50 for a good torque wrench.

Buying guide

Size

Torque wrenches can come in many different sizes, and their size is usually dependent on the type of job that they allow you to do. The size of the torque wrench will correspond with the torque range, which means the bigger the wrench, the tougher the jobs it can do.

For example, a torque wrench with a 1/4” drive is ideal for smaller nuts and bolts and is typically ideal for work that ranges from 50 to 250 inch/pounds.

  • 3/8” drive = For work that ranges from 15 to 75 foot/pounds, making it ideal for use on most cars and smaller, lighter trucks.
  • ½” drive =  For work that ranges from 30 to 250 foot/pounds, making it ideal for use on engine mounts, suspension, and transmission mounts.
  • 3/4” drive =  3/4” drives are ideal for center lug wheels, and while most people will not need a torque that offers this much power unless they regularly work with vehicles. You are likely to find this type of torque wrench in professional garages as the jobs that are undertaken will require a larger amount of force.
  • If you’re not sure what size torque wrench you’ll need, please refer back to this section and think about the jobs you’re going to undertake.

Manual or electric/pneumatic

Both manual and electric torque wrenches are available, but you may be unsure as to the type of wrench you should buy. Electric tools typically offer you the chance to get your job done quickly, and with little fuss. Using a manual tool will mean that you will have to do the job yourself, and this can take time, but using a manual tool will also help you to get the job done properly. Electric wrenches can occasionally be a little too powerful for the job in question, and the need hooking up to a power source too, which can make them seem quite inconvenient. If you have never used a torque wrench before, you should think about using a manual one, to begin with so you can see how it works, and you don’t use more power than you really need to.

Material

Cheaper torque wrenches are often made with plastic, simply because they cost a little less to produce. If you would like to own a torque wrench, but you’re not going to be using it very often, you may wish to opt for a cheaper version. More expensive wrenches are typically made from an all-steel construction, making them a lot sturdier, and a lot less easier to break. If you are looking for a torque wrench that is happy to take a lot of abuse, opt for one that has been made from steel.

Please note that some popular torque wrenches may be copied, and their design might be used to manufacture cheaper similar-looking wrenches that may or may not be made from steel. If you’re not sure whether a cheaper model is made from steel, take a look at the packaging for more information. If the other model is significantly cheaper than a popular brand, chances are it won’t be as tough, and it may break after a while. If you are looking for a strong and sturdy wrench, try to spend a bit more money, as the more expensive models should be more reliable.

Questions

How to use a torque wrench?

When you’re about to use a torque wrench for the first time, you should understand that you will need to make a controlled and smooth motion until you hear a click, or a beep. Once you have heard the click or beep, you will know that the final value has been reached. If you jerk the wrench, you could end up with the incorrect value, meaning that the torque wrench may exert too much, or too little power.

Once you are ready to use your wrench, place it on the object that is being moved. For example, if you wish to tighten a nut, hold the bolt so it stays in place, allowing the nut to be removed. If you wish to tighten lug bolts, make sure you tighten the bolts, and don’t move the wheel.

Most torque wrenches are pretty accurate, and it’s thought that the majority are within an accuracy of 4% either way. However, some torque wrenches can be as much as 10% off either way, so you may want to make sure you have a variety of torque wrenches to hand so that most ranges of power are covered.

What can you use it for?

You can use a torque wrench for a variety of reasons, but they are most commonly used to loosen or tighten clutch pressure plates, lug bolts on vehicles, nuts and bolts, and cap bolts. This type of tool is typically used in the automotive industry, as mechanics tend to loosen a lot of lug bolts every day. There is also a need to use a torque wrench on bolts that need to be tightened to a very specific load. Certain loads are often required so that the bolts do not break, start to loosen, or stretch.

Torque wrenches can also be used with:

  • ball joint studs
  • engine cylinder head bolts
  • main bearing cap bolts
  • crankshaft pulley bolts
  • axle nuts
  • fasteners
  • flywheel bolts
  • intake manifold bolts
  • exhaust manifold bolts
  • camshaft timing gear bolts
  • connecting rod bolts

How big should you get?

Torque wrenches can come in many different sizes, and some can offer a wide range, and some offer a slightly smaller range. As we have already seen, the size of the torque wrench will correspond with the torque range, which means the bigger the wrench, the tougher the jobs it can do.

For example, a torque wrench with a 1/4” drive is ideal for smaller nuts and bolts and  is typically ideal for work that ranges from 50 to 250 inch/pounds.

  • 3/8” drive = For work that ranges from 15 to 75 foot/pounds, making it ideal for use on most cars and smaller, lighter trucks.
  • ½” drive =  For work that ranges from 30 to 250 foot/pounds, making it ideal for use on engine mounts, suspension, and transmission mounts.
  • 3/4” drive =  3/4” drives are ideal for center lug wheels, and while most people will not need a torque that offers this much power, unless they regularly work with vehicles. You are likely to find this type of torque wrench in professional garages as the jobs that are undertaken will require a larger amount of force.

Think about the type of work that you wish to undertake, and you should have more of an idea as to how big/ how much power your torque wrench should offer. If you’re unsure as to which torque wrench to use, take a look at torque wrenches of different sizes, and read the packaging as it will tell you what that particular model is suitable for.

Conclusion

By now you should have a much better idea about the kind of torque wrench you wish to buy. Think about what you need the wrench for, how often you’re going to use it, and of course, how much you are willing to pay for it. Use the above 5 torque wrenches as a guide so you are that little bit closer to finding the right torque wrench for you.

If you have any other questions or worries please contact us, or if you have any comments or improvements please leave a comment at the bottom of the page.

Best Faucet Water Filter 2017 Reviews and Comparisons

There are a lot of great water filters on the market, however, we have picked what we believe are the best filters for sale right now. We can help you to get your hands on a water filter that will give you clean, great-tasting water, at the flick of a switch.

If you would like to drink water straight from the faucet, attaching a water filter is quick, simple, and ideal. Cheaper than drinking bottled water while being more convenient, and environmentally friendly. you too could enjoy drinking freshly filtered water every single day. Take a look below for more information.

The Culligan FM-25 has advanced water filtration, that allows it to be placed on almost every faucet, meaning you can drink clearer, tastier water that’s been filtered. This water filter works to eliminate chlorine, atrazine, lindane, and sediment, so that the water tastes better, and doesn’t have an odor that puts some people off.

With a pleasant chrome finish that means the filter will not look out of place in almost any kitchen, the Culligan weighs just 1.4 pounds, meaning it’s unlikely to damage your faucet. Measuring 5.5 x 3.5 x 6.5 inches, the FM-25 is a nice size and will filter water so you can drink it right away, or cook with it if you wish.

Easy to install, and with no tools required, the water filter is thought to be capable of filtering 200 gallons of water, or for 2 months, whichever is sooner. Sold for approximately $23, and with the ability to give users the choice to use filtered or tap water at a flick of a switch, the Culligan FM-25 makes drinking a cup of filtered water very easy.

Pros
  • It is the smallest, lightest model
  • It has a 0.5 gpm flow rate at 60 psi
Cons
  • Is is not electronic

The PUR PFM800HX horizontal water filtration faucet mount comes in a pleasant chrome finish and has a very modern look. Sold for approximately $45, the PFM800HX costs almost twice as much as the Culligan water filter, but there is a good reason for this.

With added Bluetooth, this faucet water filter has the ability to track your usage via your cell phone, so you know when it needs replacing. The clear sensor monitor tells you when the filter needs to be changed, meaning you only ever use freshly filtered water.

With the ability to provide up to 100 gallons of clean water, the PUR PFM800HX doesn’t offer as much as the Culligan model does, but it does come with some great features. Reducing more than 70 contaminants in the water, and weighing just 1.1 pounds, this faucet water filter measures 7.3 x 3.2 x 7.7 inches, and really is something quite special.

Pros
  • Chrome with Bluetooth
  • It removes lead, mercury, pesticides and over 70 other contaminants
Cons
  • You have to change the filter every 2 to 3 months

The PUR FM-4100B vertical faucet water filter is thought to be the ultimate filtration system. With a clean gray finish and easy installation, the filter has a built-in life indicator helping users to keep track of how much water they have filtered, and how much they have left.

Providing up to 100 gallons of filtered water or two-three months worth, and costing approximately $32, users can enjoy freshly filtered water at the flick of a switch. Easy to install and suitable for use on almost any standard faucet, this filter weighs 1.3 pounds, and measures 3.2 x 7.8 x 7.2 inches.

Complete with adapters for internal and external thread faucets, the PUR FM-4100B can help to remove mercury and lead from your water, while reducing the amount of chlorine so that the water tastes and smells so much nicer.

Pros
  • Easy one-click installation
  • It removes lead, mercury, pesticides and over 70 other contaminants
Cons
  • It is a bit more balky that the 1st and 2nd designs 

The PUR PFM450S is a horizontal water filter, that comes in a stainless steel finish. Priced at approximately $45, this model is more expensive than the FM-4100B, but it comes with MAXION filter technology that makes this model stand out a little. The filter technology displays 3 different colors so that you roughly know how much life is left in the filter. Green means the filter is working, yellow indicates that it needs to be changed soon, and red tells you that the filter has reached the end of its life.

With the ability to remove 96% of mercury, and 99% of lead, 92% of specific pesticides, and other contaminants. This water filter is compatible with most standard faucets. The triple-action MineralClear filter has been made to reduce the presence of many contaminants while ensuring that the water still contains fluoride. With an easy-to-use filter switch that gives users clean water when they need it, and weighing just 1.1 pounds this filter means business. Measuring 7.3 x 3.2 x 7.7 inches, and with a good reputation, the PUR PFM450S water filter could be the right one for you.

Pros
  • Has a clean sensor monitor
  • It removes lead, mercury, pesticides and over 70 other contaminants
Cons
  • You have to change the filter every 2 to 3 months

The DuPont WFFM350XCH electric metered water filter is quite different from the other filters we have looked at. Priced at approximately $43, and with a smooth chrome finish, the DuPont requires 2 AA batteries because it has an electric filter meter that comes with a display showing you how much water you have filtered.

With the ability to filter up to 200 gallons of water, and with a water flow selector, this particular model seems to standout from the crowd. Working to remove asbestos, mercury, lead, turbidity, and many more contaminants, the WFFM350XCH weighs 12 ounces, and measures 7.8 x 6.4 x 2.9 inches, and comes with 2 faucet adapters, 2 washers, and a selector which allows you to turn the filtration system on and off when you need it.

Pros
  •  Has an electronic display
  • It reduces sediment, chlorine, cycts, lindane, benzene, asbestos, mercury and lead
Cons
  •  It is 7.8 x 6.4 x 2.9 inches in size

Buying guide

Materials

The materials present in a faucet water filter tend not to differ too much between makes and models, and they are usually comprised of:

Ion-exchange resin – The resin exchanges one type of ion for another, so that your water is as clean as it needs to be. When lead and other harmful ions are present in the water, the resin swaps these ions for healthier ones such as potassium and sodium.

Activated carbon – Also known as ‘Charcoal’, activated carbon is a porous material that is made up of nut shells, coconut husks, and wood. Carbon has the ability to absorb a wide range of odors, organic compounds, and colors, so that your water tastes and smells great.

Minerals – Some faucet water filters come with a layer or two of minerals that work to give the water a cleaner and fresher taste.

Electric or not

Electronic water filters can help you to determine how much life is left in the filter itself, but water filters that don’t have electronic capabilities can work just as well.

If you want to know how much more water can be filtered, feel free to purchase an electronic faucet water filter, but be prepared to pay a little bit more for it.

If you are a fan of gadgets and gizmos, you may wish to purchase a faucet water filter that has been Bluetooth enabled. This feature allows you to monitor how much life is left in the filter, via your cell phone. To do this you may have to download an app, and keep your Bluetooth on at all times, but that shouldn’t be an issue. Electronic filters can be very handy, however, if you’re happy to use a regular filter, you are likely to end up paying a little less for it.

Models

You may have noticed that there are a lot of different models available, and it’s quite likely that you’ve found it hard to choose the right model for you. Some models differ in terms of color, others may have to be installed vertically, while some need to be attached horizontally. For the most part, however, faucet water filters do tend to offer the same function: they filter contaminants out of the water to make it more drinkable.

Some faucet water filter models do tend to filter out more contaminants than others, and some even contain ion-exchanging resins so your water has a specific taste, but all filters make water that comes straight from your faucet a lot nicer to drink.

Different models also come with different prices, and it’s thought that the more expensive models can offer you a better quality of filtered water, but this is not always the case. Some slightly cheaper models are just as good as the more expensive ones, so you may not have to spend that little bit extra to get filtered water that tastes great.

Whether your new water filter comes with an electronic display, a flow selector, or Bluetooth capabilities, you can be sure that when you use a filter, water straight from your faucet will taste so much nicer.

Questions

Are faucet water filters worth it?

Faucet water filters help to remove pesticides, herbicides, chlorine, chlorine by-products, and pharmaceuticals from water. They also work to reduce bacteria, waste particles, lead, mercury, and other heavy metals that are often present in some old water pipes.

All of the above substances can cause the water to taste and smell odd, while also having a negative effect on your health. If you would like to drink water straight from the faucet, using a water filter will be worth it. Not only are they a lot cheaper than bottled water, but they’re also less harmful to the environment as well.

If you’re willing to pay approximately $23-$45 a month for a faucet water filter that will make water straight from the faucet drinkable, whilst working to reduce contaminants, in this respect, they are worth it.

How effective are faucet water filters?

Faucet water filters are very effective, as they remove many different contaminants, so that you can drink fresh filtered water, without having to buy an expensive water filter that’s kept in your refrigerator. Faucet water filters are known to be very effective, which is just one of the reasons why you see so many different types, brands, and models.

Most faucet water filters remove 96% of mercury, and 99% of lead, 92% of specific pesticides, and other contaminants. Others remove similar or a slightly lower percentage of lead and mercury, but they do remove them sufficiently so that the water you drink is clean, safe, and fresh-tasting.

What do faucet water filters remove?

As we have already seen, faucet water filters help to remove pesticides, herbicides, chlorine, chlorine by-products, and pharmaceuticals from water. They also work to reduce bacteria, waste particles, lead, mercury, and other heavy metals that are often present in some old water pipes.

While the environmental bodies work hard to control what goes into our water, sometimes contaminants do find their way into the water that we use. Whether it’s due to water coming into contact with lead pipes, pesticides, herbicides, and other substances, the water that comes out of our faucets is not as clean as it could be. Water filters can, therefore, make the water so much cleaner, because they work to remove all of those nasty contaminants that could prove to be quite harmful.

Once the contaminants have been removed/reduced, the water straight from your faucet should taste and smell so much better, making it a pleasure to drink.

How long do faucet water filters last?

Some water filters can last from 2 to 3 months, whereas others may last a little longer. If you tend to drink a lot of water, you may find that your faucet water filter doesn’t last as long as you may have thought.

Filters are usually capable of filtering 100-200 gallons of water, which is how much the average person drinks in a period of 1 to 3 months. Some water filters come with Bluetooth or another type of display that shows you how much life is left in the filter. These help you to determine how much water you can drink straight from the faucet before you need to replace your filter.

If you tend to drink a lot of water, it’s recommended that you choose a filter that can filter 200 gallons of water, as it will last you quite a long time. If you don’t drink a lot of water, opting for a model that filters just 100 gallons may be preferable, however, there is no reason why you shouldn’t purchase a faucet water filter that can filter twice as much.

Conclusion

The right faucet water filter for you will depend on your budget, and how often you drink water. There are a lot of different faucet water filters on the market right now, but we are confident that you will find the right water filter for you in the above list.

If you have any other questions or worries please contact us, or if you have any comments or improvements please leave a comment at the bottom of the page.​

Best Drill Bits 2017 Reviews and Comparisons

If you are looking for a drill bit set, chances are you already know that there are a lot of different sets on the market. It’s not always easy finding the right drill bit set for the jobs you want to undertake, but we like to think we have made your search a little bit easier. Take a look at the five products that we have reviewed below; we believe these are the best drill bit sets on the market right now, and you may find your perfect drill bet set from the list below, so you can get your jobs done using the right tools.

Products Reviews

This kit includes:

  • 3/64
  • 5/64
  • 1/8
  • 5/32
  • 3/18
  • 15/64
  • 9/32
  • 5/16
  • 23/64
  • 1/2
  • 3/8
  • 21/64
  • 19/64
  • 1/4
  • 7/32
  • 9/64
  • 9/32
  • 1/16

The Mastercraft B00BSEZOVW titanium drill bit set comes with 230 pieces that range from 1/16” to ½ an inch. Ideal for use on plastics, fiber glass, metal and wood, this set is sold for approximately $55. With a heavy storage case included and thought to last up to six times longer than many other drill bits, this set has a good reputation for being reliable and worth the money.

The heavy storage case also comes with small compartments so you can store your drill bits with ease. Weighing 4.5 pounds, and measuring 11 x 2 x 9 inches, this titanium drill bit set includes 10 small bit spares, 4 bigger bits, and 3 or 4 of the larger bits, meaning you won’t need to replace a broken drill bit right away. Ideal for those who like to undertake a spot of DIY, the Mastercraft B00BSEZOVW titanium drill bit set could be the only set you’ll ever need.

Pros
  • Can be used for wood, metal, fiber glass and plastic
  • Includes a heavy duty case
Cons
  • They cant be used for concrete or masonry

This particular kit contains:

  • 6 Carbide Tipped Rotary Masonry Drill Bits: 1/8, 5/32, 11/64, 3/16, 7/32, 1/4"
  • 3 Drill Stops: 3/16, 5/16, 3/8 1
  • Allen Key
  • 3 Spade Bits: 1/2, 5/8, 3/4 5
  • Wood-boring Brad Point Drill Bits: 1/8, 3/16, 1/4, 5/16, 3/8
  • 11 Black Oxide High Speed Steel Drill Bits: [2] 1/16, [2] 5/64, 3/32, 1/8, 9/64", 5/32", 3/16, 1/4 18 2"
  • Power Bits: [2] P1, [5] P2, [2] P3, SL6-8, SL8-10, SL10-12, SQ1, [2] SQ2, Hex 5/32, Hex 7/64, 1
  • Stubby Screw Guide 48 1"
  • 9 Nuts Drivers: 5/32, [2] 3/16, 7/32, [2] 1/4, 9/32, 5/16, 3/8 (4-Nut drivers stored in case, 5-nut drivers
  • Insert Bits: [2] P1, [15] P2, [2] P3, SL3-4, SL6-8, [2] SL8-10, SL10-12, [2] SQ1, [5] SQ2, [2] SQ3, Hex 1/16, Hex 5/64, Hex 3/32, Hex 1/8, Hex 9/64, Hex 7/32", Hex 1/4, Hex 3/16, Hex 5/32, Hex 7/64

The Craftsman B00REHGEIO is a 100-piece drilling and driving set that is ideal for use on masonry, wood, and plastic. Sold for approximately $20, the Craftsman is a relatively cheap set, but this does not mean it isn’t up to scratch. Complete with a large red case, the drill and driver kit is easy to store, and your bits can be kept in order thanks to the small compartments that keep them in place.

Weighing just 3.2 pounds, and measuring 9 x 9 x 3 inches, this particular drill bit set is not one of the lightest and smallest sets on the market, but it’s not overly heavy, and should be a good addition to any tool kit. With a good reputation, this could be the right drill bit set for you if you don’t want to spend a lot of money on a reliable kit.

Pros
  • Can be used for metal, wood, plastic and masonry 
  • Has 100 different drill bits
Cons
  •  It weighs 3.2 pounds

This set includes:

  • 34 1" Insert screw bits:
  • PH: 2x 0, 2x 1, 2x 2, 2x 3
  • PZ: 2x 0, 2x 1, 2x 2, 2x 3
  • SL: 3, 2x 5,7
  • T: 2x 10, 2x 15, 2x 20, 2x 25, 30, 40
  • H: 3, 2x 5, 6,15x 2"
  • PH: 0, 1, 2, 3
  • PZ: 0, 1, 2, 3
  • SL: 6, T: 10, 15, 20, 25
  • H: 5,6, 8x..
  • Nut Setters: 3/16, 2x 1/4, 9/32, 5/16, 11/32, 3/8, 7/16
  • 1 Countersink
  • Rotary Masonry Bits: 2x 1/8, 2x 5/32, 2x 3/16, 2x 1/4, 2x 5/16, 3/8
  • 1 Ratchet screwdriver
  • 1 25-1/2" Magnetic extension pen
  • 30x Titanium Drill Bits: 2x 1/16, 7/64, 2x 1/8, 9/64, 2x 5/32, 2x 3/16, 1/4
  • Brad Point Bits:1/8, 2x 3/16, 2x 1/4 , 2x 5/16, 3/"
  • 1 Bit holder

The Bosch MS4091 is sold for approximately $50, and comes with 91 pieces and a good reputation for being a sturdy set that will let you get a lot of jobs done. Complete with a tough case, the set only weighs 1.5 pounds, which means it is incredibly light, but this does not mean it’s unable to do the job properly.

Weighing 1.5 pounds, and measuring 12.5 x 9.2 x 2.8 inches, this light but well-built drill bit set could be exactly what you need.

Pros
  • It allows plenty of storage
  • It is equipped with built in locking system
Cons
  • It can become very heavy
  • It is not easily maneuvered

The Black & Decker BDA91109 drill bit set comes with 109 pieces, making it one of the largest sets on the market. Sold for approximately $18, it is quite cheap, and this may be because it does not come with a drill or driver, but that doesn’t mean it’s not useful.

Suitable for use with metal, masonry, wood, and plastic the drill bit set also comes with a storage case, making the set completely portable. Measuring 12 x 2.5 x 8.5 inches, and weighing 3 pounds, the storage case is quite tough, and the set includes:

a variety of 1 inch and 2 inch screw driving bits and a variety of drill bits

With a good reputation for being a reliable bit of kit, and great for the price, the Black & Decker BDA91109 is ideal if you’re new to DIY, and you don’t want to spend too much money on a drill bit set.

Pros
  • It allows plenty of storage
  • It is equipped with built in locking system
Cons
  • It can become very heavy
  • It is not easily maneuvered

This set includes:

  • 1/4
  • 17/64
  • 1/16
  • 6/64
  • 3/32
  • 7/64
  • 1/8
  • 2/64
  • 5/32
  • 11/64
  • 13/32
  • 25/64
  • 3/16
  • 13/64
  • 7/32
  • 15/64
  • 23/64
  • 11/32
  • 21/64
  • 5/16
  • 19/64
  • 9/32
  • 1/2
  • 3/64
  • 16/32
  • 28/64
  • 27/64
  • 1/16
  • 3/8

The Drill America DWD29J-CO-PC Qualtech 29 piece drill bit set is smaller than the other sets that we have reviewed, but it does have an outstanding reputation. Sold for approximately $85, this set is a lot more expensive than some, but it does come with some very high quality drill bits that come with a gold oxide finish that gives the bits more wear resistance.

Ideal for drilling very hard materials, this drill bit set weighs just 2.20 pounds, and comes with a cylindrical drill bit carrying case, and a belt hook so it can travel with you, wherever you go. With an impressive reputation, and ideal for those tough jobs, if you’re willing to spend more money to get a drill bit set that is reliable, this could be the one for you.

Pros
  • It allows plenty of storage
  • It is equipped with built in locking system
Cons
  • It can become very heavy
  • It is not easily maneuvered

Buying guide

Shapes

There are usually quite a few different shaped drill bits in the drill bit sets that you find adorning hardware stores and websites. The different shapes and their purposes are: Twist bits – also known as a ‘Morse bit’ these are the most common bits, and they have been designed to help you drill metal, but they can also be used for drilling many different types of materials too Hole saw bits – these include a circular saw ring and a twist bit, the teeth on this type of bit has been made to cut smooth holes. Countersink bits – these bits create a pocket that screw heads can be placed in. Split point bit – These are also designed for drilling metal, and although they are very similar to twist bits, they come with a split point to help you keep your center when drilling. Auger bits – auger bits create rough, long holes in wood, and they are commonly used to drill through framing studs Brad point bit – these bits are used in woodworking, and they have isolated cutting edges which help them to create a smooth hole. Paddle or spade bits – these bits are used to drill holes in wood

Sizes

The size of the drill bit will depend on the job you need to do. Different jobs will require different sized drill bits. Ideally you should pick a drill bit that will fit nicely into your drill, but you also need to make sure you use a bit that does not slip when you’re driving a screw. The process of choosing a drill bit is usually trial and error, but after a while you will get used to knowing which bit is ideal for the job in hand. If the drill bit you have selected moves when you’re turning a screw, opt for a larger bit instead.

Materials

Drill bits are typically made from a range of metals, and each metal has been used as it comes with a unique advantage. Some of the materials that are used are: Low carbon steel – this is quite cheap to make, but it often needs sharpening, and is ideal for use on soft plastics and wood. Cobalt steel alloy – has longevity and high performance, ideal for use with metals. High carbon steel – this loses its temper and the cutting edge if it gets too hot. High carbon steel is ideal for use on wood and metal. High speed steel – used in the production industry because of its ability to keep its temper. Ideal for use on ceramics, wood, and metal. Titanium and a mixture of ceramic coatings – allows softer bits to perform better. Ideal for use with tough materials. Tungsten carbide, and carbide tipped – The strongest bits, costly, but highly effective. Ideal for use on most materials, including stone.

Questions

What are the different shapes?

The different shaped drill bits allow you to carry out different jobs. For example, a slotted screw will need a slotted drive bit so that it can be put in place. A square screw will need to be drilled in place with a square drill bit, and so on.

Spade drill bits are ideal for drilling holes in wood. Working quickly and effectively, the spade drill bits in your set can splinter the exit and entry, but they are ideal for cutting into wood and are a great addition to any drill bit set.

When using a drill bit, please make sure that you use the right size and shape for the job. When you first start drilling, you may be unsure as to which drill bit you should use, but you will get used to it after a while.

What material should I go for?

As we have already seen, drill bits usually comprise of a wide range of metals. Ideally, you would use a tungsten carbide, or a carbide tipped drill bit, but they can be quite expensive. If you cannot afford to buy a tungsten carbide, or a carbide tipped drill bit set, you may have to opt for a cheaper set that may not be quite as strong.

If you are new to the world of DIY, it would not be wise to splash out on an expensive drill bit set. Instead, you should opt for a cheaper set such as the Black & Decker BDA91109, that is a good ‘Starter’ kit. Kits such as these will help you make your first steps in the world of DIY, while you’re still using some fairly soft materials. The more experienced you become, the more likely it is that you will want to opt for more expensive and tougher drill bit sets, as you will have more of an idea as to what works for you, and what doesn’t.

What is the difference in shanks?

The difference in shanks (The part of the drill bit that you insert into the drill) is related to its length. Some shanks are long and ideal for creating long holes, whereas others are much shorter, and therefore ideal when you want to drill a small hole. The shanks need to be a specific length so they can be secured in the drill, but they also allow you to drill as deep as you wish.

Conclusion

Finding the right drill bit set is not always easy, but we are sure that you can find the right drill bit set from the list of 5 sets that you can find above. Think about the jobs that you need to carry out, and determine which drill bit set is the right one for you.

​If you have any other questions or worries please contact us, or if you have any comments or improvements please leave a comment at the bottom of the page.